Click densis lignum vultus SPC pavimento
Descriptio:
Item：SL1079-1
Crassitudo;4.0mm~8.0mm
Gere, Stratum:0.2mm~0.7mm
Substratum (Libitum)EVA/IXPE, 1.0mm~2.0mm
Magnitudo7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Customization
Traditionem amplectentes, culturam et futuram, in nostra natura est.TopJoy Click locking wood look SPC Tabulatum est valde durabile et stabile tabulatum propter nucleum rigidum (cum polymerum lapide compositum) et amplificationem technicae et effectus.
"Amissum Horizontem", ex nova nostra collectione Shangri-La, consilium pulchritudinis et mysterii naturae inspiratum, recentibus technologicis mixtum ut perficiat ad spatium vitae nostrae aetatis.Eius lapis polymerus nucleus compositus (SPC) factus est cum C% virgine summa norma in industria ad stabilitatem faciendam impervia et magnitudine.Indutus iacuit et duplex UV laquerus adiuvat ad augendas liniamenta resistentiae, ignis retardantis, lapsus liberorum necnon anti-bacteria.Systema clusurae clusurae provectae technologiae Europaeae inservit ut eius praecisio et rectitudo curet.Eius facile est instituere et conservare necnon postulationem praevisionis opsonatum limitatum.TOPJOY Click lignum densis vultus SPC pavimentum probavit se unum optimum esse tabulatum vinyllorum in area producti mundi et valde exceptum a millions familiarum, officiorum, hotels et aliarum spatia commercii.
| Specification | |
| Superficiem textura | Lignum Texture |
| altiore Crassitudo | 4mm |
| Substratum (Libitum) | IXPE/EVA (1mm/1.5mm) |
| gere Stratum | 0.2mm.(8 Mil.) |
| Latitudo | 7.25 (184mm.) |
| Longitudo | 48 (1220mm). |
| perago | UV Coating |
| Obstructio Ratio |
|
| Applicationem | Commercial & Residential |
Technical data:
| SPC RIGID-CORE PLANK ARTI DATA | ||
| Technical Information | Test Methodi | Proventus |
| Dimensional | EN427 & | Transi |
| Crassitudo in total | EN428 & | Transi |
| Crassitudo lapsum stratis | EN429 & | Transi |
| Dimensional Stability | IOS 23999:2018 & ASTM F2199-18 | Vestibulum Directio ≤0.02% (82oC @ 6hrs) |
| Trans Manufacture Directio ≤0.03% (82oC @ 6hrs) | ||
| Flexilis (mm) | IOS 23999:2018 & ASTM F2199-18 | Precium 0.16mm(82oC @ 6hrs) |
| Peel Strength (N/25mm) | ASTM D903-98(2017) | Vestibulum Directio 62 (Mediocris) |
| Per Directio Fabrica LXIII (Mediocris) | ||
| Static Load | ASTM F970-17 | Residua Indentation: 0.01mm |
| RELICTUM Indentation | ASTM F1914-17 | Transi |
| Repugnantia scabere | ISO 1518-1:2011 | Non penetravit membrana ad onus 20N |
| Obfirmo Fortitudo (kN / m) | ISO 24334:2014 | Vestibulum Directio 4.9 kN/m |
| Per Directio Fabrica 3.1 kn/m | ||
| Color Ieiunium ut lux | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥ 6 |
| Reactionem igni | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Classis 1 | |
| ASTM E 84-18b | Classis A | |
| VOC Emissions | BS EN 14041:2018 | ND - Pass |
| ROHS/Metal! | EN 71-3:2013+A3:2018 | ND - Pass |
| pervenire | No 1907/2006 PERVENIO | ND - Pass |
| Formaldehyde emissio | BS EN14041:2018 | Classis: E 1 |
| Phthalate Test | BS EN 14041:2018 | ND - Pass |
| PCP | BS EN 14041:2018 | ND - Pass |
| Donec adipiscing Elementorum | EN 71 – 3:2013 | ND - Pass |
Stipare Information
| Stipare Information (4.0mm) | |
| Pcs/ctn | 12 |
| Pondus (KG) / ctn | 22 |
| Ctns / grabatum | 60 |
| Plt/20'FCL | 18 |
| Mq/20'FCL | 3000 |
| Pondus (KG) / GW | 24500 |
