SPC Rigid Core Vinyl Tabulatum pro aris usu
Descriptio:
Item：TJ8866L-BR03
Crassitudo;4.0mm~8.0mm
Gere, Stratum:0.2mm~0.7mm
Substratum (Libitum)EVA/IXPE, 1.0mm~2.0mm
Magnitudo.7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Customization
Fruere eximia pulchritudine granorum ligneorum vividorum cum TopJoy superficiei texturae et in tegulis strepitantium vinyllorum singulari observantia.Praesto sunt centenis et milibus diversis colorum lignis ad ornandas machinas amplis complendas
Lignea forma BR8866L-003 SPC nucleus rigidus vinyl Tabulatum, auctus orae ac color pulcher variationem dant germanam aspectum et rem realem sentiunt, sine hassle res ipsa affert..
Usus in singulis cubiculis in domo tua destinata, inter loca tegula ceramica non commendatur sicut conclave, cubiculum et amplius, hoc scuff et scabere renitens tabulatum non torquere, expandere vel reformidare etiam si in aqua demergatur.
Tutela omnino non est quaestio, durabile lapsum et UV curationem in summo curationem facillime custodire.Iusto vacuumens vel verrens et interdum mopping OK erit.
| Specification | |
| Superficiem textura | Lignum Texture |
| altiore Crassitudo | 4mm |
| Substratum (Libitum) | IXPE/EVA (1mm/1.5mm) |
| gere Stratum | 0.2mm.(8 Mil.) |
| Latitudo | 7.25 (184mm.) |
| Longitudo | 48 (1220mm). |
| perago | UV Coating |
| Obstructio Ratio |
|
| Applicationem | Commercial & Residential |
Technical data:
| SPC RIGID-CORE PLANK ARTI DATA | ||
| Technical Information | Test Methodi | Proventus |
| Dimensional | EN427 & | Transi |
| Crassitudo in total | EN428 & | Transi |
| Crassitudo lapsum stratis | EN429 & | Transi |
| Dimensional Stability | IOS 23999:2018 & ASTM F2199-18 | Vestibulum Directio ≤0.02% (82oC @ 6hrs) |
| Trans Manufacture Directio ≤0.03% (82oC @ 6hrs) | ||
| Flexilis (mm) | IOS 23999:2018 & ASTM F2199-18 | Precium 0.16mm(82oC @ 6hrs) |
| Peel Strength (N/25mm) | ASTM D903-98(2017) | Vestibulum Directio 62 (Mediocris) |
| Per Directio Fabrica LXIII (Mediocris) | ||
| Static Load | ASTM F970-17 | Residua Indentation: 0.01mm |
| RELICTUM Indentation | ASTM F1914-17 | Transi |
| Repugnantia scabere | ISO 1518-1:2011 | Non penetravit membrana ad onus 20N |
| Obfirmo Fortitudo (kN / m) | ISO 24334:2014 | Vestibulum Directio 4.9 kN/m |
| Per Directio Fabrica 3.1 kn/m | ||
| Color Ieiunium ut lux | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥ 6 |
| Reactionem igni | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Classis 1 | |
| ASTM E 84-18b | Classis A | |
| VOC Emissions | BS EN 14041:2018 | ND - Pass |
| ROHS/Metal! | EN 71-3:2013+A3:2018 | ND - Pass |
| pervenire | No 1907/2006 PERVENIO | ND - Pass |
| Formaldehyde emissio | BS EN14041:2018 | Classis: E 1 |
| Phthalate Test | BS EN 14041:2018 | ND - Pass |
| PCP | BS EN 14041:2018 | ND - Pass |
| Donec adipiscing Elementorum | EN 71 – 3:2013 | ND - Pass |
Stipare Information
| Stipare Information (4.0mm) | |
| Pcs/ctn | 12 |
| Pondus (KG) / ctn | 22 |
| Ctns / grabatum | 60 |
| Plt/20'FCL | 18 |
| Mq/20'FCL | 3000 |
| Pondus (KG) / GW | 24500 |
