100% yopanda madzi Yokhazikika Pansi ya Vinyl mu Stone pattern
Kufotokozera:
Kanthu:Chithunzi cha TYM202-1
Makulidwe:4.0mm ~ 8.0mm
Valani Layer:0.2mm ~ 0.7mm
pansi (Zosankha):EVA / IXPE, 1.0mm ~ 2.0mm
Kukula:12" X 24"/ 12" X 12"/ Kusintha mwamakonda
Kuphatikiza kulimba kosayerekezeka, mawonekedwe owoneka bwino, komanso zowoneka bwino, zolimba za vinyl pansi zimakupatsirani pansi zomwe zimakwaniritsa zomwe mukufuna pamoyo wanu.Imapangidwira mwaluso kwa eni nyumba omwe akufuna mawonekedwe owoneka bwino omwe angagwiritse ntchito chipinda chilichonse.
Wokhala ndi ufa wa miyala ya laimu wachilengedwe, polyvinyl chloride, ndi zolimbitsa thupi, SPC rigid core vinyl ndiye kutulukira kwaposachedwa kwambiri pazithunzi za vinyl.Ndi 100% yopanda madzi, tsinde lolimba kwambiri, pansi pa SPC imatha kupirira zomwe mumachita tsiku ndi tsiku.Ikani mu chipinda chilichonse, ngakhale khitchini, mabafa, zipinda zamatope ndi zipinda zapansi.Tikakumana ndi madzi matabwa athu satupa, kutsekereza kapena kutaya umphumphu.
Pakuti mwala chitsanzo SPC pansi, TYM202-1, makulidwe akhoza kukhala 4.0/5.0/6.0 mm kapena makonda, yachibadwa kukula ndi 12 "X 24".Ngakhale kuti si yopyapyala kwambiri, ndi yolimba kwambiri poyerekeza ndi makulidwe ofanana a mitundu ina ya pansi, kotero imamveka yokhazikika komanso yokhazikika poyenda.
| Kufotokozera | |
| Maonekedwe Pamwamba | Wood Texture |
| Kunenepa Kwambiri | 4 mm |
| Zovala pansi (Mwasankha) | IXPE/EVA(1mm/1.5mm) |
| Valani Layer | 0.3 mm.(Mil 12) |
| M'lifupi | 12" (305mm.) |
| Utali | 24" (610mm.) |
| Malizitsani | Kupaka kwa UV |
| Dinani |  |
| Kugwiritsa ntchito | Zamalonda & Zogona |
| SPC RIGID-CORE PLANK TECHNICAL DATA | ||
| Zambiri Zaukadaulo | Njira Yoyesera | Zotsatira |
| Dimensional | EN427 ndi | Pitani |
| Makulidwe onse | EN428 ndi | Pitani |
| Makulidwe a zigawo zovala | EN429 ndi | Pitani |
| Dimensional Kukhazikika | IOS 23999:2018 & ASTM F2199-18 | Mayendedwe Opanga ≤0.02% (82oC @ 6hrs) |
| Kuzungulira Pakupanga ≤0.03% (82oC @ 6hrs) | ||
| Kupindika (mm) | IOS 23999:2018 & ASTM F2199-18 | Mtengo wa 0.16mm(82oC @ 6hrs) |
| Mphamvu ya Peel (N/25mm) | ASTM D903-98(2017) | Njira Yopanga 62 (Avereji) |
| Kudutsa Njira Yopanga 63 (Avereji) | ||
| Static Load | ASTM F970-17 | Zotsalira Zolowera: 0.01mm |
| Zotsalira Zotsalira | ASTM F1914-17 | Pitani |
| Scratch Resistance | ISO 1518-1: 2011 | Palibe adalowa mu zokutira pa katundu 20N |
| Kukhoma Mphamvu(kN/m) | ISO 24334: 2014 | Njira Yopangira 4.9 kN/m |
| Kudutsa Njira Yopanga 3.1 kN/m | ||
| Mtundu Wachangu Kuwala | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥ 6 |
| Kuchita ndi moto | BS EN14041:2018 Ndime 4.1 & EN 13501-1:2018 | Bfl-S1 |
| Chithunzi cha ASTM E648-17A | Kalasi 1 | |
| Chithunzi cha ASTM E84-18b | Kalasi A | |
| Kutulutsa kwa VOC | TS EN 14041: 2018 | ND - Kupita |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND - Kupita |
| Fikirani | No 1907/2006 REACH | ND - Kupita |
| Kutulutsa kwa formaldehyde | EN 14041: 2018 | Gulu: E1 |
| Phthalate Test | TS EN 14041: 2018 | ND - Kupita |
| PCP | TS EN 14041: 2018 | ND - Kupita |
| Kusamuka kwa Zinthu Zina | EN 71 – 3:2013 | ND - Kupita |
| Zambiri Pakulongedza (4.0mm) | |
| Ma PC/ctn | 12 |
| Kulemera (KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Kulemera (KG)/GW | 24500 |
