Pansi pa Vinyl Plank Yapamwamba Dinani ndi Foam Back SPC Rigid Core
Kufotokozera:
Kanthu:JSD38
Makulidwe:4.0mm ~ 8.0mm
Valani Layer:0.2mm ~ 0.7mm
pansi (Zosankha):EVA / IXPE, 1.0mm ~ 2.0mm
Kukula:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Kusintha Mwamakonda Anu
Kuyika pansi komwe kumalumikizidwa kale kumachepetsa phokoso, kumapangitsa kunjenjemera, komanso kumapangitsa kutentha ndi chitonthozo pansi pa phazi, ndi maziko olimba, osanjikiza okhazikika amapangitsa kuti matabwa a vinyl atseke matabwa azikhala kwa zaka.
Zosankha zambiri zopanda madzi za SPC zolimba za vinyl zimakhala ndi chosanjikiza chothandizira kapena choyikapo pansi mu thovu.Izi zimagwira ntchito ziwiri:
Choyamba, simudzasowa kugula zowonjezera zowonjezera, ndipo chachiwiri, zimakhala zochepetsetsa komanso zosasunthika pansi pamunsi komanso kuyamwa kwa mawu pansi panu.
Mudzadziwa bwino izi ngati munayendapo pansi osayika pansi, pamakhala phokoso lopanda phokoso mukapondedwa ndipo kuthandizira komwe kumalepheretsa izi.
Pansi pa pansi pali thovu la 1.5 mm IXPE.Monga bonasi, simuyenera kugwiritsa ntchito ndalama zowonjezera pogula zinthu zapansi ndikuziyika musanayike vinyl yanu yatsopano, zomwe zimapangitsa kuyikako mwachangu komanso kosavuta.
Kuyika ndikufanana ndi pansi popanda thovu kuthandizira, kungodinanso pamalo zikhala bwino.
| Kufotokozera | |
| Maonekedwe Pamwamba | Wood Texture |
| Kunenepa Kwambiri | 6.5 mm |
| Zovala pansi (Mwasankha) | IXPE/EVA(1mm/1.5mm) |
| Valani Layer | 0.5 mm.(20 Mil.) |
| M'lifupi | 7.25" (184mm.) |
| Utali | 48 "(1220mm.) |
| Malizitsani | Kupaka kwa UV |
| Dinani |  |
| Kugwiritsa ntchito | Zamalonda & Zogona |
| SPC RIGID-CORE PLANK TECHNICAL DATA | ||
| Zambiri Zaukadaulo | Njira Yoyesera | Zotsatira |
| Dimensional | EN427 ndi | Pitani |
| Makulidwe onse | EN428 ndi | Pitani |
| Makulidwe a zigawo zovala | EN429 ndi | Pitani |
| Dimensional Kukhazikika | IOS 23999:2018 & ASTM F2199-18 | Mayendedwe Opanga ≤0.02% (82oC @ 6hrs) |
| Kuzungulira Pakupanga ≤0.03% (82oC @ 6hrs) | ||
| Kupindika (mm) | IOS 23999:2018 & ASTM F2199-18 | Mtengo wa 0.16mm(82oC @ 6hrs) |
| Mphamvu ya Peel (N/25mm) | ASTM D903-98(2017) | Njira Yopanga 62 (Avereji) |
| Kudutsa Njira Yopanga 63 (Avereji) | ||
| Static Load | ASTM F970-17 | Zotsalira Zolowera: 0.01mm |
| Zotsalira Zotsalira | ASTM F1914-17 | Pitani |
| Scratch Resistance | ISO 1518-1: 2011 | Palibe adalowa mu zokutira pa katundu 20N |
| Kukhoma Mphamvu(kN/m) | ISO 24334: 2014 | Njira Yopangira 4.9 kN/m |
| Kudutsa Njira Yopanga 3.1 kN/m | ||
| Mtundu Wachangu Kuwala | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥ 6 |
| Kuchita ndi moto | BS EN14041:2018 Ndime 4.1 & EN 13501-1:2018 | Bfl-S1 |
| Chithunzi cha ASTM E648-17A | Kalasi 1 | |
| Chithunzi cha ASTM E84-18b | Kalasi A | |
| Kutulutsa kwa VOC | TS EN 14041: 2018 | ND - Kupita |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND - Kupita |
| Fikirani | No 1907/2006 REACH | ND - Kupita |
| Kutulutsa kwa formaldehyde | EN 14041: 2018 | Gulu: E1 |
| Phthalate Test | TS EN 14041: 2018 | ND - Kupita |
| PCP | TS EN 14041: 2018 | ND - Kupita |
| Kusamuka kwa Zinthu Zina | EN 71 – 3:2013 | ND - Kupita |
| Zambiri Pakulongedza (4.0mm) | |
| Ma PC/ctn | 12 |
| Kulemera (KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Kulemera (KG)/GW | 24500 |
