Slate Classic Dusha Dhagaxa SPC Dabaqa Vinyl
Sharaxaad:
Shayga：986-06s
Dhumucda:4.0mm ~ 8.0mm
Lakabka xidho:0.2mm ~ 0.7mm
Hoosta (Ikhtiyaari):EVA/ IXPE, 1.0mm ~ 2.0mm
Cabbirka：12 "X 24"/ 12" X 12"/ Habaynta
TopJoy SPC sagxadda vinyl kaliya ma leh qaab alwaax ah laakiin sidoo kale waxay leedahay dhagax, marmar, qaabab rooga doorashadaada.
Oo waxaa jira noocyo kala duwan oo dusha sare ah oo loogu talagalay sagxadaha vinyl ee SPC.Dusha sare ee qadiimiga ah waa midka guud ee qaababka dhagxaanta.
Waxay u egtahay oo waxay u egtahay dhagax dhab ah waxayna ku fiican tahay in lagu isticmaalo musqusha, jikada iyo wixii la mid ah.
2020 nooca cusub ee SPC vinyl sagxada, lakabka xidhashada ikhtiyaarka ah, UV adkaysta ama hooska hoostiisa.
Dhagaxa SPC vinyl sagxada guud cabirka guud waa 12inch*24inch.Waxaan haynaa daaweyn badan oo dusha sare ah oo u dhigma qaababka.
Sida crystal, nijaar gacanta-xarago, EIR, classic daahay, dusha texture granite iyo iwm.
Sagxadaha TopJoy stone SPC gabi ahaanba waa biyuhu-aad uga adkeysi badan yihiin sagxadaha adag iyo sagxadaha.
Sagxadda SPC-da waxay taabataa aamusnaan iyo diirran cagaha hoostooda, waxay hubisaa inaysan xoqin, xoqin ama wasakh ka iman dadka ama xayawaanka rabaayada ah.
Sagxadda SPC waxay u rakibtaa si fudud oo degdeg ah iyada oo aan lahayn xabag-dhegooyin si loo badbaadiyo wakhtiga iyo kharashyada rakibidda.Loo heli karo Samee Laftaada.
Waxa si weyn loogu isticmaalaa guryaha/dhismaha gudaha.Guryaha (jikada, musqusha, qaybta hoose, qolka ciyaarta, qolka fadhiga, iwm.)
Dabaqyada ganacsiga (Bar, makhaayad, qolka qoob ka ciyaarka, masraxa, xafiiska, iwm).
Waxaan ku siin karnaa adeeg hal-joojin ah oo ku saabsan walxaha qurxinta gudaha, iyada oo aan loo eegin inaad tahay wax dhise ama iibiyaha, alaabada tayada ugu fiican iyo sumcadda sare ee deynta, waxay ka dhigi doontaa iskaashigu inuu noqdo isgaarsiin qurux badan oo wacan.
| Tilmaamid | |
| Dusha Texture | Qoryaha Qoryaha |
| Dhumucda guud | 4mm |
| Hoosta (ikhtiyaar) | IXPE/EVA(1mm/1.5mm) |
| Lakabka xidho | 0.3mm(12 milyan) |
| Ballaca | 12" (305mm.) |
| Dhererka | 24" (610mm.) |
| dhame | Dahaarka UV |
| Guji |  |
| Codsiga | Ganacsiga & Deegaanka |
| SPC RIGID-CORE XOGTA TECHNICAL PLANK | ||
| Macluumaadka Farsamada | Habka Imtixaanka | Natiijooyinka |
| Cabbir | EN427 & | Gudub |
| Dhumucda guud ahaan | EN428 & | Gudub |
| Dhumucda lakabyada xidhashada | EN429 & | Gudub |
| Deganaanshaha cabbirka | IOS 23999:2018 & ASTM F2199-18 | Jihada wax soo saarka ≤0.02% (82oC @ 6saacadood) |
| Guud ahaan jihada wax-soo-saarka ≤0.03% (82oC @ 6saacadood) | ||
| Curling (mm) | IOS 23999:2018 & ASTM F2199-18 | Qiimaha 0.16mm(82oC @ 6 saacadood) |
| Xoogga diirka (N/25mm) | ASTM D903-98 (2017) | Tilmaamaha Wax-soo-saarka 62 (Celceliska) |
| Guud ahaan jihada wax-soo-saarka 63 (celcelis ahaan) | ||
| Load taagan | ASTM F970-17 | Gelida Hadhaaga:0.01mm |
| Gelitaan Hadhaaga ah | ASTM F1914-17 | Gudub |
| Iska caabinta xoqitaanka | ISO 1518-1: 2011 | Ma jiro dahaarka dhexda u saaran culeyska 20N |
| Quful Quful (kN/m) | ISO 24334:2014 | Jihada wax soo saarka 4.9 kN/m |
| Guud ahaan jihada wax-soo-saarka 3.1 kN/m | ||
| Midabka Xajmiga Iftiinka | ISO 4892-3:2016 Wareega 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥ 6 |
| Falcelinta dabka | TS EN14041: 2018 Farqada 4.1 & EN 13501-1: 2018 | Bfl-S1 |
| ASTM E648-17a | Fasalka 1 | |
| ASTM E 84-18b | Fasalka A | |
| Soosaarka VOC | BS EN 14041:2018 | ND – Gudub |
| ROHS/ Birta culus | EN 71-3:2013+A3:2018 | ND – Gudub |
| Gaadhi | Maya 1907/2006 GAAR | ND – Gudub |
| Formaldehyde sii deynta | BS EN14041:2018 | Fasalka: E 1 |
| Imtixaanka Phthalate | BS EN 14041:2018 | ND – Gudub |
| PCP | BS EN 14041:2018 | ND – Gudub |
| Socdaalka Qaybaha Qaar | EN 71 - 3:2013 | ND – Gudub |
| Macluumaadka Xirmada (4.0mm) | |
| Kumbuyuutar/ctn | 12 |
| Miisaanka(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Miisaanka (KG)/GW | 24500 |
