DIY Riix Rakibaadda Rigid Core Luxury Vinyl Plank
Sharaxaad:
Shayga:UC1107-5
Dhumucda:4.0mm ~ 8.0mm
Lakabka xidho:0.2mm ~ 0.7mm
Underlay (Ikhtiyaar ah):EVA/ IXPE, 1.0mm ~ 2.0mm
Cabbirka:7.25''X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Habaynta
Dabaqyada vinyl-ka ee udub-dhexaadka ah waxay soo mareen waddo dheer tan iyo markii ay bilowgoodu hooseeyaan sida beddelka qaaliga ah ee dabaqyada adag ee dhaqameed.Mid ka mid ah shay aan isbeddelin waa la awoodi karo - laakiin tayada ayaa ku jirta saqafka!Dabaqyada vinyl-kayaga waxay leeyihiin muuqaal alwaax ah oo dhab ah oo ay fududahay in la rakibo oo xitaa sahlanaato in la ilaaliyo.
Dabaqyada Vinyl-ga ee dhaqameedku waxay ka kooban yihiin ku dhawaad gebi ahaanba PVC, heerkulka ka sarreeya 80-90F, bilaabaan inay ballaariyaan oo lumiyaan xasilloonida.Ficil ahaan, tani waxay ka dhigan tahay in looxa vinyl aan si badbaado leh loogu talin karin meelaha gaadha heerkul ka sarreeya 90F ama rakibaadaha halka orodka ugu dheer uu ka sarreeyay 35 cagood.
Anaga, TopJoy, waxa aanu arrintan wax ka qabannay annagoo dib u habayn ku samaynay xudunta looxyadayada una samaynayna dhagax-dhagax-dhagax badan.Adigoo adeegsanayna ilaa 70% maadada nuuradda ee xudunta u ah looxyadayada, waxaan abuurnaa hanti gaar ah oo “adag” sagxadahayada.Ma aha oo kaliya in nuxurka dhagaxa limestone ee sare uu macnaheedu yahay balaadhinta iyo foosha in la bilaabo, laakiin sidoo kale waxay la macno tahay in marka balaadhinta iyo foosha ay dhacaan sagxadaha ay xamili karaan.
Qof kasta oo raadiya dabaq waara oo raagaya kaas oo kor u qaada muuqaalka meel kasta oo aan bangiga jabin doonin.Dabaqa vinyl-ka adag ee asaasiga ah ayaa kugu habboon adiga!
| Tilmaamid | |
| Dusha Texture | Qoryaha Qoryaha |
| Dhumucda guud | 4mm |
| Underlay (Ikhtiyaar ah) | IXPE/EVA(1mm/1.5mm) |
| Lakabka xidho | 0.2mm(8 milyan) |
| Ballaca | 7.25" (184mm.) |
| Dhererka | 48" (1220mm.) |
| dhame | Dahaarka UV |
| Nidaamka Qufulka |
|
| Codsiga | Ganacsiga & Deegaanka |
Xogta Farsamada
| SPC RIGID-CORE XOGTA TECHNICAL PLANK | ||
| Macluumaadka Farsamada | Habka Imtixaanka | Natiijooyinka |
| Cabbir | EN427 & | Gudub |
| Dhumucda guud ahaan | EN428 & | Gudub |
| Dhumucda lakabyada xidhashada | EN429 & | Gudub |
| Deganaanshaha cabbirka | IOS 23999:2018 & ASTM F2199-18 | Jihada wax soo saarka ≤0.02% (82oC @ 6saacadood) |
| Guud ahaan jihada wax-soo-saarka ≤0.03% (82oC @ 6saacadood) | ||
| Curling (mm) | IOS 23999:2018 & ASTM F2199-18 | Qiimaha 0.16mm(82oC @ 6 saacadood) |
| Xoogga diirka (N/25mm) | ASTM D903-98 (2017) | Tilmaamaha Wax-soo-saarka 62 (Celceliska) |
| Guud ahaan jihada wax-soo-saarka 63 (celcelis ahaan) | ||
| Load taagan | ASTM F970-17 | Gelida Hadhaaga:0.01mm |
| Gelitaan Hadhaaga ah | ASTM F1914-17 | Gudub |
| Iska caabinta xoqitaanka | ISO 1518-1: 2011 | Ma jiro dahaarka dhexda u saaran culeyska 20N |
| Quful Quful (kN/m) | ISO 24334:2014 | Jihada wax soo saarka 4.9 kN/m |
| Guud ahaan jihada wax-soo-saarka 3.1 kN/m | ||
| Midabka Xajmiga Iftiinka | ISO 4892-3:2016 Wareega 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥ 6 |
| Falcelinta dabka | TS EN14041: 2018 Farqada 4.1 & EN 13501-1: 2018 | Bfl-S1 |
| ASTM E648-17a | Fasalka 1 | |
| ASTM E 84-18b | Fasalka A | |
| Soosaarka VOC | BS EN 14041:2018 | ND - Gudub |
| ROHS/ Birta culus | EN 71-3:2013+A3:2018 | ND - Gudub |
| Gaadhi | Maya 1907/2006 GAAR | ND - Gudub |
| Formaldehyde sii deynta | BS EN14041:2018 | Fasalka: E 1 |
| Imtixaanka Phthalate | BS EN 14041:2018 | ND - Gudub |
| PCP | BS EN 14041:2018 | ND - Gudub |
| Socdaalka Qaybaha Qaar | EN 71 - 3:2013 | ND - Gudub |
Macluumaadka Xirmada:
| Macluumaadka Xirmada (4.0mm) | |
| Kumbuyuutar/ctn | 12 |
| Miisaanka(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Miisaanka (KG)/GW | 24500 |
