LVT oo la xoojiyay
Sharaxaad:
Shayga：JSD45
Dhumucda:4.0mm ~ 8.0mm
Lakabka xidho:0.2mm ~ 0.7mm
Hoosta (Ikhtiyaari):EVA/ IXPE, 1.0mm ~ 2.0mm
Cabbirka：7.25''X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Habaynta
Sagxadahayada SPC waa ikhtiyaar wax qabad sare leh oo bixiya xasillooni iyo waar la xoojiyey.
Sababtoo ah xudunta cufnaanta sare, sagxaddu waa mid si cajiib ah u waara oo u adkaysata.Waxay leedahay dhammaan sifooyinka LVT: biyuhu-celiyaan, ceymiska xayawaanka, qoyska-saaxiibtinimo, laakiin leh heer cusub oo ilaalin saameyn ah.Waxay u adkeysan kartaa taraafikada ugu adag waxayna ku habboon tahay codsiga ganacsiga.
LVT waxay u taagan tahay Luxury Vinyl Tile, oo ah mid ka mid ah sagxadaha adkeysiga leh ee caanka ah maanta.
TOPJOY'S SPC sagxadda sagxadda waxaa loo tixgalin karaa nooc ka mid ah LVT La Wanaajiyey.
Marka la barbar dhigo LVT, Sagxaddayada SPC waa casriyeyn ballaaran.Waxay 10 jeer ka fiican tahay iska caabbinta saamaynta, 60% ka dhakhso badan in la rakibo marka loo eego xabagta hoos u dhacda LVT iyo in ka badan oo saaxiibtinimo leh.Sagxadda SPC sidoo kale aad ayey uga xasilloon tahay LVT.Looma baahna kala-goysyada balaadhinta ama nusqaamaha waaweyn ee agagaarka wareegga.
Sababtoo ah xudunta cufnaanta sare, sagxaddu aad bay u waartaa oo u adkaysata.Waxay leedahay dhammaan sifooyinka LVT: biyuhu-celiyaan, ceymiska xayawaanka, qoyska-saaxiibtinimo, laakiin leh heer cusub oo ilaalin saameyn ah.Waxay u adkeysan kartaa taraafikada ugu adag waxayna ku habboon tahay codsiyada ganacsiga.
Run ahaantii in la yiraahdo, SPC sagxadda asaasiga ah ee adag ayaa ka badan LVT oo la xoojiyay ee warshadaha sagxadaha maanta.Waa bedelka ugu fiican ee sagxadaha LVT iyo doorashada ugu caqli badan isticmaalayaasha ganacsiga iyo qoyska.
| Tilmaamid | |
| Dusha Texture | Qoryaha Qoryaha |
| Dhumucda guud | 7.5mm |
| Hoosta (ikhtiyaar) | IXPE/EVA(1mm/1.5mm) |
| Lakabka xidho | 0.5mm(20 milyan) |
| Ballaca | 7.25" (184mm.) |
| Dhererka | 48" (1220mm.) |
| dhame | Dahaarka UV |
| Guji |  |
| Codsiga | Ganacsiga & Deegaanka |
| SPC RIGID-CORE XOGTA TECHNICAL PLANK | ||
| Macluumaadka Farsamada | Habka Imtixaanka | Natiijooyinka |
| Cabbir | EN427 & | Gudub |
| Dhumucda guud ahaan | EN428 & | Gudub |
| Dhumucda lakabyada xidhashada | EN429 & | Gudub |
| Deganaanshaha cabbirka | IOS 23999:2018 & ASTM F2199-18 | Jihada wax soo saarka ≤0.02% (82oC @ 6saacadood) |
| Guud ahaan jihada wax-soo-saarka ≤0.03% (82oC @ 6saacadood) | ||
| Curling (mm) | IOS 23999:2018 & ASTM F2199-18 | Qiimaha 0.16mm(82oC @ 6 saacadood) |
| Xoogga diirka (N/25mm) | ASTM D903-98 (2017) | Tilmaamaha Wax-soo-saarka 62 (Celceliska) |
| Guud ahaan jihada wax-soo-saarka 63 (celcelis ahaan) | ||
| Load taagan | ASTM F970-17 | Gelida Hadhaaga:0.01mm |
| Gelitaan Hadhaaga ah | ASTM F1914-17 | Gudub |
| Iska caabinta xoqitaanka | ISO 1518-1: 2011 | Ma jiro dahaarka dhexda u saaran culeyska 20N |
| Quful Quful (kN/m) | ISO 24334:2014 | Jihada wax soo saarka 4.9 kN/m |
| Guud ahaan jihada wax-soo-saarka 3.1 kN/m | ||
| Midabka Xajmiga Iftiinka | ISO 4892-3:2016 Wareega 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥ 6 |
| Falcelinta dabka | TS EN14041: 2018 Farqada 4.1 & EN 13501-1: 2018 | Bfl-S1 |
| ASTM E648-17a | Fasalka 1 | |
| ASTM E 84-18b | Fasalka A | |
| Soosaarka VOC | BS EN 14041:2018 | ND – Gudub |
| ROHS/ Birta culus | EN 71-3:2013+A3:2018 | ND – Gudub |
| Gaadhi | Maya 1907/2006 GAAR | ND – Gudub |
| Formaldehyde sii deynta | BS EN14041:2018 | Fasalka: E 1 |
| Imtixaanka Phthalate | BS EN 14041:2018 | ND – Gudub |
| PCP | BS EN 14041:2018 | ND – Gudub |
| Socdaalka Qaybaha Qaar | EN 71 - 3:2013 | ND – Gudub |
| Macluumaadka Xirmada (4.0mm) | |
| Kumbuyuutar/ctn | 12 |
| Miisaanka(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Miisaanka (KG)/GW | 24500 |
