Marble muuqaal SPC Vinyl sagxadda
Sharaxaad:
Shayga:TYM204
Dhumucda:4.0mm ~ 8.0mm
Lakabka xidho:0.2mm ~ 0.7mm
Underlay (Ikhtiyaar ah):EVA/ IXPE, 1.0mm ~ 2.0mm
Cabbirka:12 "X 24"/ 12" X 12"/ Habaynta
Sagxadaha Vinyl ee SPC ee muuqaalka marmarka ah waa ururin ku salaysan hal-abuurnimo.Waxay si cad u ekaysiinaysaa midabka iyo miraha marmarka ah iyadoo aanu lahayn dareen qabow.Xitaa xirfadlaha waa lagu khiyaan karaa indhihiisa isagoon taaban.Waxay soo qabataa sharafta caadiga ah ee marmarka laakiin si caqli-gal ah loogu dhex daray tignoolajiyada moodeelka.Waxay si gaar ah ugu habboon tahay isticmaalka ganacsiga iyo gudaha.
Faahfaahinta Alaabta
TopJoy SPC Dabaqa Vinyl waa hal-abuurka ugu cusub ee tignoolajiyada sagxadda, sagxadaha isku dhafan ee dhagaxa-polymer, ma aha oo kaliya 100% aan biyuhu lahayn iyo iska caabbinta dabka, laakiin sidoo kale waxay bixisaa xasillooni cabbir, adkeysi iyo iska caabin saameyn ilaa 20 jeer ka badan tignoolajiyada sagxadda sagxadaha hadda jira.Sagxadaha Vinyl-ka ee SPC-ga ee Marble waa mid ka mid ah nashqadaha gaarka ah ee dib u soo celiya quruxda iyo kala duwanaanta dabiiciga ah ee marmarka waxay u abuurtaa sagxadaha dhabta ah ee gurigaaga.
Intaa waxaa dheer, mid kasta oo ka mid ah alaabooyinkan waxay ka kooban yihiin si sahlan oo loo riixo, rakibaadda sabbaynaysa ee aan lahayn xabagta, kaydinta waqti iyo lacag.
Sidoo kale waa ubad-u-saaxiibtinimo, lid ku ah simbiriirixidda oo si fudud loo nadiifin karo.Waxaa loo isticmaali karaa meelaha qoyan, sida musqulaha, jikada iyo qolalka dharka lagu dhaqo.
Waxa kale oo ay xamili kartaa cilladaha sagxada hoose, waxay bixisaa dahaarka dhawaaqa aad u fiican iyo raaxada sare ee cagaha hoosteeda.
TopJoy marmar muuqaal SPC Dabaqa Vinyl ayaa ah isha ugu dambeysa ee baahiyahaaga.Laga soo bilaabo deegaan ilaa ganacsi, waxaad ka heli kartaa wax kasta oo aad u baahan tahay guri wanaagsan.
| Tilmaamid | |
| Dusha Texture | Qoryaha Qoryaha |
| Dhumucda guud | 4mm |
| Underlay (Ikhtiyaar ah) | IXPE/EVA(1mm/1.5mm) |
| Lakabka xidho | 0.2mm(8 milyan) |
| Ballaca | 12" (305mm.) |
| Dhererka | 24" (610mm.) |
| dhame | Dahaarka UV |
| Nidaamka Qufulka |
|
| Codsiga | Ganacsiga & Deegaanka |
Xogta Farsamada
 SPC RIGID-CORE XOGTA TECHNICAL PLANK | ||
| Macluumaadka Farsamada | Habka Imtixaanka | Natiijooyinka |
| Cabbir | EN427 & | Gudub |
| Dhumucda guud ahaan | EN428 & | Gudub |
| Dhumucda lakabyada xidhashada | EN429 & | Gudub |
| Deganaanshaha cabbirka | IOS 23999:2018 & ASTM F2199-18 | Jihada wax soo saarka ≤0.02% (82oC @ 6saacadood) |
| Guud ahaan jihada wax-soo-saarka ≤0.03% (82oC @ 6saacadood) | ||
| Curling (mm) | IOS 23999:2018 & ASTM F2199-18 | Qiimaha 0.16mm(82oC @ 6 saacadood) |
| Xoogga diirka (N/25mm) | ASTM D903-98 (2017) | Tilmaamaha Wax-soo-saarka 62 (Celceliska) |
| Guud ahaan jihada wax-soo-saarka 63 (celcelis ahaan) | ||
| Load taagan | ASTM F970-17 | Gelida Hadhaaga:0.01mm |
| Gelitaan Hadhaaga ah | ASTM F1914-17 | Gudub |
| Iska caabinta xoqitaanka | ISO 1518-1: 2011 | Ma jiro dahaarka dhexda u saaran culeyska 20N |
| Quful Quful (kN/m) | ISO 24334:2014 | Jihada wax soo saarka 4.9 kN/m |
| Guud ahaan jihada wax-soo-saarka 3.1 kN/m | ||
| Midabka Xajmiga Iftiinka | ISO 4892-3:2016 Wareega 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥ 6 |
| Falcelinta dabka | TS EN14041: 2018 Farqada 4.1 & EN 13501-1: 2018 | Bfl-S1 |
| ASTM E648-17a | Fasalka 1 | |
| ASTM E 84-18b | Fasalka A | |
| Soosaarka VOC | BS EN 14041:2018 | ND – Gudub |
| ROHS/ Birta culus | EN 71-3:2013+A3:2018 | ND – Gudub |
| Gaadhi | Maya 1907/2006 GAAR | ND – Gudub |
| Formaldehyde sii deynta | BS EN14041:2018 | Fasalka: E 1 |
| Imtixaanka Phthalate | BS EN 14041:2018 | ND – Gudub |
| PCP | BS EN 14041:2018 | ND – Gudub |
| Socdaalka Qaybaha Qaar | EN 71 - 3:2013 | ND – Gudub |
Macluumaadka Xirmada:
| Macluumaadka Xirmada (4.0mm) | |
| Kumbuyuutar/ctn | 12 |
| Miisaanka(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Miisaanka (KG)/GW | 24500 |
