Qoryaha dabiiciga ah waxay u egyihiin Qoryaha Dabaqa ee Vinyl Core Rigid
Sharaxaad:
Shayga: TJ1016-KB10
Dhumucda:4.0mm ~ 8.0mm
Lakabka xidho:0.2mm ~ 0.7mm
Underlay (Ikhtiyaar ah):EVA/ IXPE, 1.0mm ~ 2.0mm
Cabbirka：7.25''X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Habaynta
Qoryaha dabiiciga ah waxay u egyihiin Sagxadaha Vinyl-ka ee adag kaliya maaha 100% biyuhu iyo dabka u adkaysta, laakiin sidoo kale waxay bixisaa xasillooni cabbir, adkeysi iyo, iska caabin saameyn ilaa 20 jeer tan tignoolajiyada sagxadda sagxadda hadda jirta.Waxay ku darsataa nakhshad soo celinaysa bilicda iyo kala duwanaanta dabiiciga ah ee alwaaxdu waxay gurigaaga u abuurtaa sagxad aan dhib lahayn.
TOPJOY muuqaalka alwaax dabiici ah oo adag Plank waa badeeco sagxad leh oo la taaban karo kaliya maahan qolalka la deggan yahay laakiin sidoo kale meelaha ganacsiga.Muuqaalkeeda alwaax ayaa la wareegay qaybaha la dego maadaama ay siiso milkiilayaasha horumarinta qaab alwaax ah oo macquul ah oo jajab ah qiimaha qoryaha dhabta ah.Goobaha ganacsigu waxay isticmaalaan qaababka alwaaxyada marar badan, si kastaba ha ahaatee muuqaalada dabiiciga ah waxay siiyaan ganacsiyada fursad ay ku abuuraan meelo gaar ah.
Saamayntan dabiiciga ah ee dabiiciga ah ee loo yaqaan 'vinyl plank' ma aha mid soo ifaya qurux iyo qaab qadiimi ah, laakiin sidoo kale waxay haysaa xasilloonideeda cabbirkeeda iyo daacadnimadeeda Waad ku mahadsan tahay qaab-dhismeedkeeda gaarka ah, oo ay ku jiraan xudunta dhagaxa iyo lakabka xirashada xoqan-iska caabinta si ay ugu habboonaato iyo daahan UV, looxa waa kan ugu waara ee loo dhisay bay'ada ugu adag.
Looxa vinyl-ka ee udub-dhexaadka ah wuxuu ku siinayaa xasilooni maskaxeed sanadaha soo socda.
| Tilmaamid | |
| Dusha Texture | Qoryaha Qoryaha |
| Dhumucda guud | 4mm |
| Underlay (Ikhtiyaar ah) | IXPE/EVA(1mm/1.5mm) |
| Lakabka xidho | 0.2mm(8 milyan) |
| Ballaca | 7.25" (184mm.) |
| Dhererka | 48" (1220mm.) |
| dhame | Dahaarka UV |
| Nidaamka Qufulka |
|
| Codsiga | Ganacsiga & Deegaanka |
Xogta Farsamada
| SPC RIGID-CORE XOGTA TECHNICAL PLANK | ||
| Macluumaadka Farsamada | Habka Imtixaanka | Natiijooyinka |
| Cabbir | EN427 & | Gudub |
| Dhumucda guud ahaan | EN428 & | Gudub |
| Dhumucda lakabyada xidhashada | EN429 & | Gudub |
| Deganaanshaha cabbirka | IOS 23999:2018 & ASTM F2199-18 | Jihada wax soo saarka ≤0.02% (82oC @ 6saacadood) |
| Guud ahaan jihada wax-soo-saarka ≤0.03% (82oC @ 6saacadood) | ||
| Curling (mm) | IOS 23999:2018 & ASTM F2199-18 | Qiimaha 0.16mm(82oC @ 6 saacadood) |
| Xoogga diirka (N/25mm) | ASTM D903-98 (2017) | Tilmaamaha Wax-soo-saarka 62 (Celceliska) |
| Guud ahaan jihada wax-soo-saarka 63 (celcelis ahaan) | ||
| Load taagan | ASTM F970-17 | Gelida Hadhaaga:0.01mm |
| Gelitaan Hadhaaga ah | ASTM F1914-17 | Gudub |
| Iska caabinta xoqitaanka | ISO 1518-1: 2011 | Ma jiro dahaarka dhexda u saaran culeyska 20N |
| Quful Quful (kN/m) | ISO 24334:2014 | Jihada wax soo saarka 4.9 kN/m |
| Guud ahaan jihada wax-soo-saarka 3.1 kN/m | ||
| Midabka Xajmiga Iftiinka | ISO 4892-3:2016 Wareega 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥ 6 |
| Falcelinta dabka | TS EN14041: 2018 Farqada 4.1 & EN 13501-1: 2018 | Bfl-S1 |
| ASTM E648-17a | Fasalka 1 | |
| ASTM E 84-18b | Fasalka A | |
| Soosaarka VOC | BS EN 14041:2018 | ND - Gudub |
| ROHS/ Birta culus | EN 71-3:2013+A3:2018 | ND - Gudub |
| Gaadhi | Maya 1907/2006 GAAR | ND - Gudub |
| Formaldehyde sii deynta | BS EN14041:2018 | Fasalka: E 1 |
| Imtixaanka Phthalate | BS EN 14041:2018 | ND - Gudub |
| PCP | BS EN 14041:2018 | ND - Gudub |
| Socdaalka Qaybaha Qaar | EN 71 - 3:2013 | ND - Gudub |
Macluumaadka Xirmada:
| Macluumaadka Xirmada (4.0mm) | |
| Kumbuyuutar/ctn | 12 |
| Miisaanka(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Miisaanka (KG)/GW | 24500 |
