Dabaqa Marble-cawlan ee qumman ee qumman SPC Dabaqa Xudunta Adag
Sharaxaad:
Shayga:TYM 214
Dhumucda:4.0mm ~ 8.0mm
Lakabka xidho:0.2mm ~ 0.7mm
Underlay (Ikhtiyaar ah):EVA/ IXPE, 1.0mm ~ 2.0mm
Cabbirka:12 "X 24"/ 12" X 12"/ Habaynta
SPC sagxadda asaasiga ah ee adag waa 100% biyuhu-mareen.Markaa si weyn ayaa loo isticmaali karaa marka loo eego sagxadaha dhaqanka.TYM 214 waa muuqaal marmar dabiici ah, dhumucda caadiga ah waa 4.0mm/5.0mm/6.0mm.Lakabka xirashada waa 0.2mm ilaa 0.7mm.Cabbirku waa 12" x 24" (305mm x 610mm).
Faahfaahinta Alaabta
Maadaama sagxadda SPC ay tahay mid aan biyuhu lahayn oo qoyaan-ku dheggan, kana nadiifsan yihiin cayayaanka iyo cayayaanka, waxa loo isticmaali karaa waqti ka dheer sagxadda caadiga ah.Waxay ka samaysan tahay dhagaxyo iyo baco, qaybta ugu muhiimsani waa nuurad (calcium carbonate)+ PVC Powder + Stabilizer, marka waa mid deegaanka u fiican oo dib loo warshadayn karo, iyada oo aan wax wasakh ah lahayn.Dusha sare waxaa lagu daaweeyaa dahaarka UV, ma aha oo kaliya in uu u ekaado dhagax marble dabiici ah balse sidoo kale waxa ay sahlaysaa in la nadiifiyo, dadku waxa ay isticmaali karaan xaaqin si ay u nadiifiyaan maalin kasta, waxa ay dadka ka badbaadisaa waqti iyo tamar badan, taasi waa mid ka mid ah. faa'iidooyinka.Matt, gloss dhexe waa daaweynta ugu caansan ee dusha sare ee muuqaalka marmar SPC.Waxaan samayn karnaa dhejisyo kala duwan iyadoo loo eegayo qaabab kala duwan.Sidoo kale ma aha dab-demis, waxay ka hortagi kartaa gubashada darajada dab-demiska ee B1.Waxay ka kooban tahay iska caabin heer sare ah, waxayna ku habboon tahay isticmaalka guriga iyo ganacsiga.In ka badan 800 oo qaab ayaa diyaar ah.
| Tilmaamid | |
| Dusha Texture | Qoryaha Qoryaha |
| Dhumucda guud | 4mm |
| Underlay (Ikhtiyaar ah) | IXPE/EVA(1mm/1.5mm) |
| Lakabka xidho | 0.2mm(8 milyan) |
| Ballaca | 12" (305mm.) |
| Dhererka | 24" (610mm.) |
| dhame | Dahaarka UV |
| Nidaamka Qufulka |
|
| Codsiga | Ganacsiga & Deegaanka |
Xogta Farsamada
 SPC RIGID-CORE XOGTA TECHNICAL PLANK | ||
| Macluumaadka Farsamada | Habka Imtixaanka | Natiijooyinka |
| Cabbir | EN427 & | Gudub |
| Dhumucda guud ahaan | EN428 & | Gudub |
| Dhumucda lakabyada xidhashada | EN429 & | Gudub |
| Deganaanshaha cabbirka | IOS 23999:2018 & ASTM F2199-18 | Jihada wax soo saarka ≤0.02% (82oC @ 6saacadood) |
| Guud ahaan jihada wax-soo-saarka ≤0.03% (82oC @ 6saacadood) | ||
| Curling (mm) | IOS 23999:2018 & ASTM F2199-18 | Qiimaha 0.16mm(82oC @ 6 saacadood) |
| Xoogga diirka (N/25mm) | ASTM D903-98 (2017) | Tilmaamaha Wax-soo-saarka 62 (Celceliska) |
| Guud ahaan jihada wax-soo-saarka 63 (celcelis ahaan) | ||
| Load taagan | ASTM F970-17 | Gelida Hadhaaga:0.01mm |
| Gelitaan Hadhaaga ah | ASTM F1914-17 | Gudub |
| Iska caabinta xoqitaanka | ISO 1518-1: 2011 | Ma jiro dahaarka dhexda u saaran culeyska 20N |
| Quful Quful (kN/m) | ISO 24334:2014 | Jihada wax soo saarka 4.9 kN/m |
| Guud ahaan jihada wax-soo-saarka 3.1 kN/m | ||
| Midabka Xajmiga Iftiinka | ISO 4892-3:2016 Wareega 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥ 6 |
| Falcelinta dabka | TS EN14041: 2018 Farqada 4.1 & EN 13501-1: 2018 | Bfl-S1 |
| ASTM E648-17a | Fasalka 1 | |
| ASTM E 84-18b | Fasalka A | |
| Soosaarka VOC | BS EN 14041:2018 | ND – Gudub |
| ROHS/ Birta culus | EN 71-3:2013+A3:2018 | ND – Gudub |
| Gaadhi | Maya 1907/2006 GAAR | ND – Gudub |
| Formaldehyde sii deynta | BS EN14041:2018 | Fasalka: E 1 |
| Imtixaanka Phthalate | BS EN 14041:2018 | ND – Gudub |
| PCP | BS EN 14041:2018 | ND – Gudub |
| Socdaalka Qaybaha Qaar | EN 71 - 3:2013 | ND – Gudub |
Macluumaadka Xirmada:
| Macluumaadka Xirmada (4.0mm) | |
| Kumbuyuutar/ctn | 12 |
| Miisaanka(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Miisaanka (KG)/GW | 24500 |
