100% e sa keneleng metsi ebile e tšoarella ka thata
Tlhaloso:
Ntho:Tlhaloso: BSA09
Botenya:4.0mm ~ 8.0mm
Apara Layer:0.2mm ~ 0.7mm
Katlase (Taba ea boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Customization
Haeba u batla sehlahisoa sa fatše ka tlung e nang le liphoofolo tse ruuoang lapeng, ke tla u buella BSA 09 100% e sa keneleng metsi le e tšoarellang ea SPC.Sekhahla sa ho roala se lebisa ho ho hlaka le ho hanyetsa meno.Kalafo ea UV e holim'a metsi e etsa hore fatše ho be le matheba le matheba.
BSA 09 ke mebala ea setso ea lehong e shebahalang.Bokaholimo bo bentši bo tlaase, kahoo bo etsa hore bo shebahale joaloka lepolanka la sebele.Boholo bo tloaelehileng ba lepolanka ke 7.25" x 48", boholo ba boholo ke 9" x 48".Re etsa kalafo ea UV holimo ho etsa hore lepolanka la vinyl la SPC le be bonolo haholo ho le hloekisa le ho le hlokomela.Haeba u na le liphoofolo tse ruuoang lapeng kapa bana lapeng, ho hloekisa fatše ke mosebetsi oa letsatsi le letsatsi.Kahoo ho bohlokoa haholo ho khetha sebaka se bonolo sa ho hloeka fatše.Koko e thata ha e kenelle metsi ka 100%, o ka sebelisa mop ho hloekisa fatše.E ke ke ea ruruha, ea thiba, ea sotheha kapa ea theola botšepehi bo tsoang metsing.E ka boela ea kenngoa ka kamoreng ea ho hlapela, kichineng le phaposing ea ho jella.Habohlokoa le ho feta, ha e thelle le ha e na le metsi.Kahoo ho bolokehile bakeng sa bana ba mathang kapa batho ba baholo ba tsamaeang.Haeba o hloka ho ikutloa o phutholohile, re ka hokela pad ea ho ts'oha mokokotlong oa lepolanka la SPC.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ha ho boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.3 limilimithara.(12 Mil.) |
| Bophara | 7.25" (184mm.) |
| Bolelele | 48" (1220mm.) |
| Qetella | Ho roala ha UV |
| Tobetsa |  |
| Kopo | Khoebo & Bolulo |
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
