Lepolanka la Lithaele tsa Vinyl tsa Sesole sa Sesole se Setala sa SPC
Tlhaloso:
Ntho:984-10
Botenya:4.0mm ~ 8.0mm
Apara Layer:0.2mm ~ 0.7mm
Katlase (Taba ea boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:12" X 24"/ 12" X 12"/ Ho iketsetsa
Ena ke lepolanka la rona la fatše la vinyl le chesang le rekisoang le nang le sebopeho sa k'hapete ea maiketsetso.E kopantsoe le mebala e meraro e meholo: Army Green, Yellow, le white.Mebala ena e meraro e kopantsoe hammoho ka tsela e etsang hore batho ba ikutloe ba le bacha ba bile ba hloekile.E hloka litlhoko tsa bareki bao ka bobeli ba batlang sebopeho sa lik'hapete le boiketlo ba lithaele.
Ho khetha k'hapete kapa fatše ke taba e tšoenyang batho ba bangata.Joalo ka ha bohle re tseba, lik'hapete li sebelisoa hantle joalo ka mokatong oa liofisi le liphaposi tsa kamore ea bolulo, ka lebaka la maikutlo a eona a maholo a maoto le litlamorao tse khutsitseng.Leha ho le joalo, monyetla ona o ka nkeloa sebaka ke TopJoy SPC vinyl flooring, 'me lesela la rona le feliloeng le khomaretsoe ka morao ho tsa rona.Ho boetse ho na le boleng bo bong ba k'hapete ea rona bo shebahalang ka lithaele tsa vinyl.Ka mabaka a latelang: Taba ea pele, lithaele tsa rona li bonolo ho li hloekisa.Taba ea bobeli, e khona ho mamella sephethephethe se phahameng hantle.Ea boraro, e boloka tlhokomelo e telele ebile e pata litšila.Theko ea ho kenya le ho hlokomela k'hapete e holimo haholo.Leha ho le joalo, ho na le tefo e eketsehileng ha u khetha lithaele tsa rona tsa ponahalo ea k'hapete ea SPC.Mapolanka a rona a lithaele tsa SPC vinyl ha a kenelle metsi ebile a tšoarella, a ka sebelisoang eseng feela libakeng tsa khoebo empa le malapeng.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ha ho boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.3 limilimithara.(12 Mil.) |
| Bophara | 12" (305mm.) |
| Bolelele | 24" (610mm.) |
| Qetella | Ho roala ha UV |
| Tobetsa |  |
| Kopo | Khoebo & Bolulo |
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
