Sebaka sa 'Nete sa Lejoe la Tlhaho la Vinyl Flooring
Tlhaloso:
Ntho:986-03s
Botenya:4.0mm ~ 8.0mm
Apara Layer:0.2mm ~ 0.7mm
Katlase (Taba ea boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:12" X 24"/ 12" X 12"/ Ho iketsetsa
Setsi sena sa motheo sa vinyl se sa keneleng metsi se sebelisoa haholo likhoebong tse nyane, mabenkeleng a mabenkele le likamoreng tsa metsi ka matlong a joalo ka kichineng le likamoreng tsa ho hlapela, eseng feela hobane e tšoarella, ho bonolo ho e kenya le ho e hlokomela, empa hape hobane e na le lejoe la 'nete.
Ka sistimi ea ho notlela patent ea Unilin, setulo sa SPC se bonolo ho se kenya le ho se qhaqholla.Esita le beng ba matlo ba ka kenya ka bobona ka mor'a ho bala tataiso ea ho kenya.Sena se na le botsoalle bo felletseng ho DIYers.Ka hona, vinyl ena e sa keneleng metsi e hohetse tlhokomelo ea bareki ba bangata lefatšeng ka bophara, haholo-holo ha mefuta ea herringbone le chevron e hlaha 'marakeng.Beng ba matlo ba phathahaneng le beng ba likhoebo ba rata sebaka se thata ka lebaka la ho tšoarella ha sona, ho hana matheba, le ho se hlolehe ho otloa.Mapolanka kapa lithaele tsa SPC li na le chebahalo ea 'nete ea lehong, konkreite kapa lejoe, empa e batla e le theko e tlase ebile e bonolo ho e hlokomela.Bakeng sa tlhokomelo, sohle seo ba se hlokang ke mopopo o metsi.Lera le hatisitsoeng la vinyl ke lona le etsang hore vinyl e shebahale e batla e tšoana le thepa ea tlhaho.986-03 e na le filimi ea tlhaho ea khatiso ea majoe e patang letheba la letsatsi le letsatsi, ho roala le ho taboha.Ho phaella moo, haeba lepolanka leha e le lefe le senyehile, tlosa lepolanka feela ebe u le nkela sebaka se secha.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ha ho boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.3 limilimithara.(12 Mil.) |
| Bophara | 12" (305mm.) |
| Bolelele | 24" (610mm.) |
| Qetella | Ho roala ha UV |
| Tobetsa |  |
| Kopo | Khoebo & Bolulo |
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
