DIY Tobetsa ho kenya Rigid Core Luxury Vinyl Plank
Tlhaloso:
Ntho:UC1107-5
Botenya:4.0mm ~ 8.0mm
Wear Layer:0.2mm ~ 0.7mm
Katlase (Ka boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Customization
Rigig core vinyl flooring e tsamaile nako e telele ho tloha ha e qala ka mokhoa o bonolo e le mokhoa o sa theko e tlase ho feta mekato e thata ea lehong.Ntho e 'ngoe e sa kang ea fetoha ke ho khona ho reka - empa boleng bo teng ka marulelong!Mabato a rona a vinyl a na le chebahalo ea 'nete ea lehong le sebopeho seo ho leng bonolo ho se kenya le ho se hlokomela habonolo.
Mekato e tloaelehileng ea li-vinyl e entsoe ka hoo e batlang e le PVC ka ho feletseng, 'me, ka mocheso o ka holimo ho 80-90F, e qala ho hola le ho lahleheloa ke botsitso.Ha e le hantle, sena se bolela hore lepolanka la vinyl le ne le ke ke la khothaletsoa ka mokhoa o sireletsehileng libakeng tse fihlang mocheso o ka holimo ho 90F kapa lits'ebetsong moo nako e telele ka ho fetisisa e neng e le ka holimo ho maoto a 35.
Rōna, TopJoy, re ile ra rarolla bothata bona ka ho fetola motheo oa mapolanka a rona hore e be motsoako oa majoe a mokoetla a mangata.Ka ho sebelisa lejoe la mokoetla ho fihla ho 70% bohareng ba mapolanka a rona, re theha thepa e "thata" e ikhethang ea fuluru ea rona.Hase feela hore litaba tse phahameng tsa mokoetla li bolela ho atolosa le ho fokotseha ho fokolang ho qala, empa hape ho bolela hore ha ho atolosoa le ho fokotseha ho etsahala mekato e ka sebetsana le eona.
Mang kapa mang ea batlang sebaka se tšoarellang, se tšoarellang nako e telele se ntlafatsang ponahalo ea sebaka leha e le sefe 'me se ke ke sa senya banka.Lifate tse thata tsa vinyl li nepahetse bakeng sa hau!
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ka boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.2 limilimithara.(8 Mil.) |
| Bophara | 7.25" (184mm.) |
| Bolelele | 48" (1220mm.) |
| Qetella | Ho roala ha UV |
| Locking System |
|
| Kopo | Khoebo & Bolulo |
Lintlha tsa Tekheniki:
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND - Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND - Feta |
| Finyella | No 1907/2006 REACH | ND - Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND - Feta |
| PCP | BS EN 14041:2018 | ND - Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND - Feta |
Lintlha tsa ho paka:
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
