Gray Walnut Super core SPC Vinyl Floor
Tlhaloso:
Ntho:JSD53
Botenya:4.0mm ~ 8.0mm
Apara Layer:0.2mm ~ 0.7mm
Katlase (Taba ea boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Customization
Likarolo tsena tse bohlooho tsa SPC tsa walnut li tumme mekhoeng ea sejoale-joale ea mokhabiso ka mabaka: Ha e na mafito, ka moelelo oa minimalism.'Me' mala oa bohlooho o etsa tonne ea khotso le feshene.Vinyl click flooring e ntse e tsoela pele ho ba e 'ngoe ea theko e tlaase le e bonolo ka ho fetisisa ho e kenya, e finyellang litlhoko tsa bacha ba mehleng ea kajeno ba batlang ho fetola mokhabiso khafetsa.
Haeba u batla setaele se phahameng, leka rona super core vinyl flooring.Grey walnut SPC vinyl floor ke ea boleng bo holimo, e ntle, ebile e theko e tlaase e tla etsa hore sebaka sa hau se shebahale se hlolla.
E etselitsoe libaka tsa sejoale-joale tsa bolulo le tsa khoebo tse nang le lijo-thollo tse hlakileng tsa walnut.Ha e le hantle, bareki ba bangata ha ba hlokomele hore ba shebile vinyl ha ba bona sehlahisoa - ke kamoo se shebahalang kateng.E na le thepa e sa keneleng metsi e betere, e tsitsitse ka boholo, le ho tšoarella ho feta mapolanka a sebele.Kaha sebaka se seholo sa vinyl ha se na metsi ka 100%, se ka kenngoa libakeng tse metsi 'me ha se na ho ruruha ha se pepesehetse metsi.Kaha e tsitsitse ka mokhoa o itseng, e ke ke ea atoloha kapa ea nyenyefala tlas'a maemo a tloaelehileng.
The underlay ea boikhethelo e kentsoeng esale pele e fana ka phokotso e ntle haholo ea molumo malapeng le liofising.Ka nako ea zero acclimation le mokhoa o bonolo oa ho notlela, o ka ba le ponahalo e ntle, ea tlhaho e sa keneleng metsi ka nako!
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 5.5 limilimithara |
| Katlase (Ha ho boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.3 limilimithara.(12 Mil.) |
| Bophara | 7.24" (184mm.) |
| Bolelele | 36" (914mm.) |
| Qetella | Ho roala ha UV |
| Tobetsa |  |
| Kopo | Khoebo & Bolulo |
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
