Mokatong oa sejoale-joale oa Concrete SPC Vinyl Flooring
Tlhaloso:
Ntho:TYM 206
Botenya:4.0mm ~ 8.0mm
Apara Layer:0.2mm ~ 0.7mm
Katlase (Taba ea boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:12" X 24"/ 12" X 12"/ Ho iketsetsa
TYM206 e nepahetse bakeng sa beng ba matlo ba batlang floating ea vinyl ea indasteri, ea sejoale-joale.SPC ena ea setaele e khona ho mamella matlo a maphathaphathe, liofisi le likhoebo tse nang le sephethephethe se seholo!Ka mokhoa o bonolo oa ho notlela, o ka ba le sebaka se shebahalang ka konkreite ntle le matsatsi a ho emela hore konkreite e ome.
SPC flooring e hohetse bareki ba bangata ka selemo sa 2020 ka lebaka la melemo ea eona ea ho hanyetsa metsi, polokeho, ho tšoarella, le botsitso ba sebopeho.E entsoe ka phofo ea limestone le polyvinyl chloride, mofuta ona oa lepolanka la vinyl o na le mokokotlo o thata haholo, ka hona, o ke ke oa ruruha ka likamoreng tse metsi joalo ka kichine, likamore tsa ho hlapela, likamore tse ka tlase, jj. boemo ba ho fetoha ha mocheso.Sebaka se thata se boetse se na le lesela la ho roala le lera la ho roala UV.Ha lesela la ho apara le le teteaneng, le haufi le mokokotlo o thata, le tla tšoarella haholoanyane.Lera la ho roala la UV ke lera le fanang ka tlhokomelo e bonolo le thepa e hanyetsanang le mengoapo.Ka mekhoa e mecha ea indasteri ea fatše, hona joale ha re na ponahalo ea lehong feela empa hape le mekhoa ea kajeno ea majoe le ea konkreite.Boholo ba kamehla ba moralo oa konkreite ke 12" * 24", 'me re ntse re theha sebopeho sa lisekoere se shebahalang joalo ka lithaele tsa nnete.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ha ho boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.3 limilimithara.(12 Mil.) |
| Bophara | 12" (305mm.) |
| Bolelele | 24" (610mm.) |
| Qetella | Ho roala ha UV |
| Tobetsa |  |
| Kopo | Khoebo & Bolulo |
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
