Setaele sa Sejoale-joale se sa Thing ho Rua Mofuta o Mocha o Enjenetsoeng o Thata holim'a Bokaholimo
Tlhaloso:
Ntho:JSC603
Botenya:4.0mm ~ 8.0mm
Apara Layer:0.2mm ~ 0.7mm
Katlase (Taba ea boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Customization
SPC e nang le ts'ebetso e phahameng ea ho thibela metsi, anti-corrosion, boemo bo tsitsitseng, e amoheleha haholo ho tsoa mebaraka.Leha ho le joalo, theko ea eona ke karolo ea leshome feela ea fatše ea lehong le thata.Kae kapa kae moo u batlang ho sebelisa, ntlo kapa sebaka sa khoebo, tsohle li ka kopana le litlhoko tsa hau tsa ho bonts'a chebahalo e tšoarellang le e ntle.
Ho thibela molumo ke e 'ngoe ea lintho tsa bohlokoa ka ho fetisisa ha batho ba khetha fatše.Mofuta oa rona o mocha oa fatše o thata oa SPC o sebelisa sekoaelo sa boleng bo holimo, 'me o ka fokotsa lerata haholo mme o fetile litekong tsa molumo oa litsebi.Kamora ho kenya fuluru ea rona ea Engineered SPC, batho ba tla ba le sebaka se khutsitseng sa ho lula le ho sebetsa.Ka lekhalo le se nang metsi le thibelang metsi, leqhubu la sonic le thata ho hasana ka likheo tse kopanetsoeng.Bakeng sa bokaholimo, re sebelisa theknoloji ea ts'ebetso ea UV makhetlo a 2 ho netefatsa tlhokahalo ea sebaka se thata le ho hanyetsa kutu.Ho bonolo ho hloekisa le ho boloka fatše ho tloha TopJoy, 'me u hloka metsi feela ha u hloekisa fatše.Haeba u batla ho fetola e 'ngoe ea fuluru nakong e tlang, ho bonolo haholo 'me u se ke ua e tlosa le ho e kenya hape.Ka hona, ho kenya fatše TopJoy SPC ho tla u tlisetsa sebaka se monate sa bolulo le sekoaelo sa fatše se tsoetseng pele ka mokhoa o bonolo oa ho kenya.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 6mm |
| Katlase (Ha ho boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.5 limilimithara.(20 Mil.) |
| Bophara | 7.25" (184mm.) |
| Bolelele | 48" (1220mm.) |
| Qetella | Ho roala ha UV |
| Tobetsa |  |
| Kopo | Khoebo & Bolulo |
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
