Mokatong oa sejoale-joale oa White Coral Reef Hard Core
Tlhaloso:
Ntho:986-11s
Botenya:4.0mm ~ 8.0mm
Apara Layer:0.2mm ~ 0.7mm
Katlase (Taba ea boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:12" X 24"/ 12" X 12"/ Ho iketsetsa
White coral reef hardcore flooring e etselitsoe eseng feela bakeng sa fatše empa le bakeng sa bokaholimo ba lebota.Mokhoa oa eona o motle o amoheloa ke 'maraka.Tile ena e ka nka sebaka sa lithaelese tsa ceramic hantle ka theko ea eona e tlase le ts'ebetso e phethahetseng.
TopJoy 986-11s mapolanka a coral reef hardcore vinyl a qapiloe bakeng sa ho nkela lithaele tsa ceramic sebaka, ho latela lintlha tse 'maloa tse latelang.
Pele ho tsohle, tile ea ceramic e boima haholo, e bolelang hore e tla bitsa chelete e ngata nakong ea lipalangoang.
Taba ea bobeli, ho bonolo ho robeha tile ea ceramic.Phuputso e bonts'a litefiso tse phahameng tsa ho khutla thekisong ea lithaele tsa ceramic.
Ea boraro, ho tla ba le tšilafalo ea tikoloho nakong ea tlhahiso ea ceramic.
Qetellong, ho hanyetsa ho thella ha lithaele tsa ceramic ho tlase haholo!Ho kotsi haholo ha bana le batho ba baholo ba tsamaea holim'a metsi a ceramic.
Ka hona, TopJoy hardcore tile e na le ts'ebetso e ts'oanang e thata, empa theko ke karolo ea bohlano feela ea tile ea ceramic ka unit.Le hoja topJoy hardcore flooring e na le boima bo phahameng, boima bo bobebe ho feta lithaele tsa ceramic.TopJoy vinyl lepolanka Flooring e entsoeng ka lintho tse virgin le eco-friendly, tse ileng tsa feta liteko tsa VOC ho paka hore ha ho na phello e kotsi bophelong bo botle.Bokaholimo ba 986-11s bo na le lera le khahlanong le ho thella, le fanang ka sebaka se sireletsehileng bakeng sa malapa.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ha ho boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.3 limilimithara.(12 Mil.) |
| Bophara | 12" (305mm.) |
| Bolelele | 24" (610mm.) |
| Qetella | Ho roala ha UV |
| Tobetsa |  |
| Kopo | Khoebo & Bolulo |
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
