Romantic Marble Sheba SPC Rigid Core Flooring
Tlhaloso:
Ntho ea bohlokoa: TPS014-G
Botenya:4.0mm ~ 8.0mm
Wear Layer:0.2mm ~ 0.7mm
Katlase (Ka boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:12" X 24"/ 18" X 18"/ 24" X 24", Ho itloaetsa
Moon Crater, joalo ka lebitso leo re le fileng sebaka sena sa 'mabole se thata sa vinyl, se na le moralo oa mokhabiso o etsisang granite e putsoa e nang le marotholi le matheba a khahlisang ho eona, e fanang ka moea oa lerato sebakeng sa bolulo.
Moralo oa 'mabole o tiileng oa fatše o sebelisoa haholo bakeng sa kamore ea ho jella, kichineng le reschorenteng, ka lebaka la 100% ea eona e sa keneleng metsi le e thibelang ho thella, e bolokehile hore e ka sebelisoa lits'ebetsong tse pharaletseng.Ka sistimi ea ho notlela ea Uniclick, ha e na sekhomaretsi ebile e phaphamala, e leng se etsang hore ho be bonolo ho e kenya mme ha e hloke sekhomaretsi kapa lisebelisoa tse rarahaneng.Iketsetse (DIY) e thabela haholo.Batho ba ka kenya mohlala ofe kapa ofe kamoo ba batlang kateng.Tile ena ea fatše e fumaneha ka boholo ba 12" x 24" (305mm x 610mm), 18"x24" (457mm x 610) le boholo bo boholo 18 1/2"x 36 1/2" (470mm x 925mm), e leng se etsang ha e shebahale e batla e se na phapang ho tloha ho lithaele tsa 'mabole tse majabajaba.Bokaholimo bo ne bo ka hatisoa bo bataletse.Haeba batho ba batla ho fumana maikutlo a leoto le bonolo, e ka boela ea kenngoa pele ka ho ts'oaroa ka mokokotlo ka morao ho tile.Botenya ba "Shock pad" bo tloha ho 1.0mm ho isa ho 2.0mm.Botenya ba lithaele kaofela bo tloha ho 4.5mm ho isa ho 9mm.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ka boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.2 limilimithara.(8 Mil.) |
| Bophara | 12” |
| Bolelele | 36” |
| Qetella | Ho roala ha UV |
| Locking System |
|
| Kopo | Khoebo & Bolulo |
Lintlha tsa Tekheniki:
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND - Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND - Feta |
| Finyella | No 1907/2006 REACH | ND - Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND - Feta |
| PCP | BS EN 14041:2018 | ND - Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND - Feta |
Lintlha tsa ho paka:
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
