Luxury Vinyl Plank Flooring Cofa nge Foam Back SPC Rigid Core
Inkcazo:
Into:JSD38
Ukutyeba:4.0mm~8.0mm
Nxiba umaleko:0.2mm~0.7mm
Ukwangaphantsi (Ukhetho):EVA / IXPE, 1.0mm ~ 2.0mm
Ubungakanani:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Customization
I-underlayment encanyathiselwe kwangaphambili inciphisa isandi, iyothusa-yokothusayo, kwaye iphucula ubushushu kunye nentuthuzelo phantsi kweenyawo, ngondoqo oqinileyo, umaleko wokunxiba ozinzileyo wenza i-vinyl yokutshixa iplanga ihlale iminyaka.
Iinketho ezininzi ze-Vinyl eziqinileyo ze-SPC ezingenamanzi zibandakanya umaleko oxhasayo okanye i-underlayment eqhotyoshelweyo kwi-foam.Oku kuphumeza iinjongo ezimbini:
Okokuqala, akuyi kufuneka uthenge i-underlayment eyongezelelweyo, kwaye okwesibini, ibonelela ngaphantsi kwe-dense kunye ne-retainable underfoot kunye nokufunxa isandi kumgangatho wakho.
Uya kukwazi oku ngcono ukuba ukhe wahamba kumgangatho ngaphandle kokufakwa ngaphantsi, kukho isandi esingenanto xa unyathelwa kwaye uxhaso oluqhotyoshelweyo luyakuthintela oku.
Sele kukho i-1.5 mm ye-IXPE ye-mats foam exhaswa ngasezantsi komgangatho.Njengebhonasi, akufuneki uchithe imali eyongezelelweyo ekuthengeni i-underlayment kwaye uyifake ngaphambi kokufaka i-vinyl yakho entsha, eyenza ukufakwa ngokukhawuleza nalula.
Ufakelo luyafana nomgangatho ngaphandle kokuxhaswa kwamagwebu, ukucofa nje endaweni kuya kulungile.
| Inkcazo | |
| Ubume boMphezulu | Ubume boMthi |
| Ukutyeba ngokubanzi | 6.5mm |
| Ukwangaphantsi (Ngokuzithandela) | IXPE/EVA(1mm/1.5mm) |
| Nxiba umaleko | 0.5mm.(I-20 yezigidi) |
| Ububanzi | 7.25" (184mm.) |
| Ubude | 48" (1220mm.) |
| Gqiba | Ukugquma kweUV |
| Cofa |  |
| Isicelo | EzoRhwebo kunye neNdawo yokuhlala |
| SPC IRIGID-CORE PLANK IDATHA YOBUGCISA | ||
| Ulwazi lobuGcisa | Indlela yoVavanyo | Iziphumo |
| Ubukhulu | EN427 & | Dlula |
| Ukutyeba ngokupheleleyo | EN428 & | Dlula |
| Ukutyeba kweeleya zokunxiba | EN429 & | Dlula |
| Uzinzo lweDimensional | IOS 23999: 2018 & ASTM F2199-18 | Umkhombandlela wokuVeliswa ≤0.02% (82oC @ 6hrs) |
| Umkhombandlela wokuVeliswa kuwo wonke ≤0.03% (82oC @ 6hrs) | ||
| Ukugoqa (mm) | IOS 23999: 2018 & ASTM F2199-18 | Ixabiso 0.16mm(82oC @ 6hrs) |
| Amandla ePeel (N/25mm) | I-ASTM D903-98(2017) | Umkhombandlela wokuVeliswa 62 (uMndilili) |
| Umkhombandlela wokuVeliswa kuwo wonke 63 (uMndilili) | ||
| Umthwalo omileyo | I-ASTM F970-17 | iNtsalela yoHlengahlengiso:0.01mm |
| Intsalela yokuLandelwa | I-ASTM F1914-17 | Dlula |
| Ukunyangwa kwemikrwelo | ISO 1518-1: 2011 | Akukho yangena ingubo kumthwalo 20N |
| Amandla okutshixa(kN/m) | ISO 24334:2014 | Umkhombandlela wokuVelisa 4.9 kN/m |
| Kwimiba yoMveliso engaphaya kwe-3.1 kN/m | ||
| UkuKhawuleza koMbala ukuya kuKhanya | ISO 4892-3:2016 Umjikelo 1 & ISO105–A05:1993/Cor.2:2005&ASTM D2244-16 | ≥ 6 |
| Ukusabela kumlilo | BS EN14041:2018 Isiqendu 4.1 & EN 13501-1:2018 | I-Bfl-S1 |
| I-ASTM E648-17a | Iklasi yoku-1 | |
| I-ASTM E 84-18b | Iklasi A | |
| Ukukhutshwa kwe-VOC | I-BS EN 14041: 2018 | ND – Ukudlula |
| I-ROHS / Isinyithi esinzima | EN 71-3: 2013 + A3: 2018 | ND – Ukudlula |
| Fikelela | Hayi 1907/2006 FIKELELA | ND – Ukudlula |
| Ukukhutshwa kwe-formaldehyde | BS EN14041:2018 | Iklasi: E1 |
| Uvavanyo lwePhthalate | I-BS EN 14041: 2018 | ND – Ukudlula |
| PCP | I-BS EN 14041: 2018 | ND – Ukudlula |
| Ukufuduka kwezinto ezithile | EN 71 – 3:2013 | ND – Ukudlula |
| Ulwazi lokuPakisha(4.0mm) | |
| IiPC/ctn | 12 |
| Ubunzima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Ubunzima(KG)/GW | 24500 |
