Ipateni yelitye SPC RIGID CORE PLANK
Inkcazo:
Into:TYM 211
Ukutyeba:4.0mm~8.0mm
Nxiba umaleko:0.2mm~0.7mm
Ukwangaphantsi (Ukhetho):EVA / IXPE, 1.0mm ~ 2.0mm
Ubungakanani:12” X 24”/ 12” X 12”/ Ukwenza ngokwezifiso
Stone Rigid core SPC iplanga flooring features ultra uzinzo, high impembelelo ukuqina kunye noyilo oluphumelele ibhaso lomgangatho wobunewunewu.I-TopJoy Rigid Core SPC yomgangatho weplanga i-100% ingangeni manzi, i-pet-friendly, kunye ne-anti-termite.Umgangatho we-SPC ungasetyenziswa ngokukhawuleza emva kokufakwa.Kwaye iplanga engundoqo ye-SPC kulula ukuyiqhawula kwaye iphinde isetyenziswe.
Ipateni yelitye le-TopJoy SPC engqongqo yeplanga ithathwa njengesizukulwana esitsha sesigqubuthelo somgangatho.
Umgangatho oqinileyo weplanga we-SPC uza kunye nesitshixo senkampani ye-Unilin.Kwaye sisebenzisa izixhobo zokusika i-German high-speed cut, iteknoloji yokusika echanekileyo, ukusika i-angle echanekileyo.Sinobuso obugudileyo nobungenamthungo.
Khusela umgangatho xa kunokwenzeka ukuba kungene amanzi ngempazamo.Inokufakwa ngokulula kuhlobo oluhlukileyo lwesiseko somgangatho, nokuba ikhonkrithi, i-ceramic okanye i-flooring ekhoyo.
I-TopJoy yamkela i-OEM kwaye ilungisa uyilo.Kukho amawaka eepateni ozikhethileyo.Ubude bomgangatho we-SPC, ububanzi, kunye nobukhulu bunokwenziwa ngokwemfuno yakho.Ubukhulu obuqhelekileyo buyi-4mm-8mm.Kwaye i-IXPE/EVA yangaphantsi yenze umgangatho oqinileyo womgangatho ube ngcono ubhengezo kunye nemvakalelo egqwesileyo yangaphantsi.Utyikityo olungundoqo oluqinileyo lwe-SPC alunakonakala, nto leyo eyenza ukuba ibe lolona khetho lufanelekileyo kwizithuthi eziphezulu kunye neendawo zorhwebo.
| Inkcazo | |
| Ubume boMphezulu | Ubume boMthi |
| Ukutyeba ngokubanzi | 4mm |
| Ukwangaphantsi (Ngokuzithandela) | IXPE/EVA(1mm/1.5mm) |
| Nxiba umaleko | 0.3mm.(12 Mil.) |
| Ububanzi | 12” (305mm.) |
| Ubude | 24” (610mm.) |
| Gqiba | Ukugquma kweUV |
| Cofa |  |
| Isicelo | EzoRhwebo kunye neNdawo yokuhlala |
| SPC IRIGID-CORE PLANK IDATHA YOBUGCISA | ||
| Ulwazi lobuGcisa | Indlela yoVavanyo | Iziphumo |
| Ubukhulu | EN427 & | Dlula |
| Ukutyeba ngokupheleleyo | EN428 & | Dlula |
| Ukutyeba kweeleya zokunxiba | EN429 & | Dlula |
| Uzinzo lweDimensional | IOS 23999: 2018 & ASTM F2199-18 | Umkhombandlela wokuVeliswa ≤0.02% (82oC @ 6hrs) |
| Umkhombandlela wokuVeliswa kuwo wonke ≤0.03% (82oC @ 6hrs) | ||
| Ukugoqa (mm) | IOS 23999: 2018 & ASTM F2199-18 | Ixabiso 0.16mm(82oC @ 6hrs) |
| Amandla ePeel (N/25mm) | I-ASTM D903-98(2017) | Umkhombandlela wokuVeliswa 62 (uMndilili) |
| Umkhombandlela wokuVeliswa kuwo wonke 63 (uMndilili) | ||
| Umthwalo omileyo | I-ASTM F970-17 | iNtsalela yoHlengahlengiso:0.01mm |
| Intsalela yokuLandelwa | I-ASTM F1914-17 | Dlula |
| Ukunyangwa kwemikrwelo | ISO 1518-1: 2011 | Akukho yangena ingubo kumthwalo 20N |
| Amandla okutshixa(kN/m) | ISO 24334:2014 | Umkhombandlela wokuVelisa 4.9 kN/m |
| Kwimiba yoMveliso engaphaya kwe-3.1 kN/m | ||
| UkuKhawuleza koMbala ukuya kuKhanya | ISO 4892-3:2016 Umjikelo 1 & ISO105–A05:1993/Cor.2:2005&ASTM D2244-16 | ≥ 6 |
| Ukusabela kumlilo | BS EN14041:2018 Isiqendu 4.1 & EN 13501-1:2018 | I-Bfl-S1 |
| I-ASTM E648-17a | Iklasi yoku-1 | |
| I-ASTM E 84-18b | Iklasi A | |
| Ukukhutshwa kwe-VOC | I-BS EN 14041: 2018 | ND – Ukudlula |
| I-ROHS / Isinyithi esinzima | EN 71-3: 2013 + A3: 2018 | ND – Ukudlula |
| Fikelela | Hayi 1907/2006 FIKELELA | ND – Ukudlula |
| Ukukhutshwa kwe-formaldehyde | BS EN14041:2018 | Iklasi: E1 |
| Uvavanyo lwePhthalate | I-BS EN 14041: 2018 | ND – Ukudlula |
| PCP | I-BS EN 14041: 2018 | ND – Ukudlula |
| Ukufuduka kwezinto ezithile | EN 71 – 3:2013 | ND – Ukudlula |
| Ulwazi lokuPakisha(4.0mm) | |
| IiPC/ctn | 12 |
| Ubunzima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Ubunzima(KG)/GW | 24500 |
