Ipateni yelitye SPC iVinyl yomgangatho wokuhlala kunye nezorhwebo
Inkcazo:
Inqaku: TPS006-B
Ukutyeba:4.0mm~8.0mm
Ileya yokunxiba:0.2mm~0.7mm
Ilayiti yangaphantsi (Ngokuzikhethela):EVA / IXPE, 1.0mm ~ 2.0mm
Ubungakanani:12” X 24”/ 18” X 18”/ 24” X 24”, Ukwenziwa ngokwezifiso
Kudityaniswe izitayile zamatye ezimangalisayo kunye neziyinyani kwi-12” X 24” ifomathi yeplanga, sidala inkangeleko emangalisayo elungele naliphi na igumbi.IRigid Core Vinyl Tiles yakhelwe ukugcina ubuhle bayo - naphantsi kwetrafikhi ephezulu, ukufuma okuphezulu kunye nefuthe eliphezulu.
Imodeli ye-TPS006-B yipateni yamatye, eya kuba yithayile yomgangatho eyomelelayo edumileyo kwiintsuku ezimbalwa ezizayo ukubuyisela iithayile zebhastile / zamatye.
Imbonakalo ye-Hyper-realistic kunye nokuthungwa, ii-bevels eziphuculweyo kunye nokwahluka kombala okuhle kunika inkangeleko yokwenyani kunye nokuziva kweyona nto yokwenyani, ngaphandle kobunzima obuziswa yinto yokwenyani.Uluhlu olubanzi lweenketho lukhethwa abo bafuna ukukwazi ukwenza ngokwezifiso inkangeleko yekhaya labo.Inokufakwa kwiindawo zekhaya ezifana namagumbi okuhlamba impahla, amagumbi okuhlambela, amagumbi angaphantsi, kunye namakhitshi.
Ukugcinwa akuyongxaki kwaphela, umaleko wokunxiba ozinzileyo kunye nonyango lwe-UV ngaphezulu kwenza kube lula kakhulu ukuzigcina ucocekile.Ukutshayela rhoqo okanye ukutshayela kunye nokukrwempa ngamaxesha athile kuya kulungile.
| Inkcazo | |
| Ubume boMphezulu | Ubume boMthi |
| Ukutyeba ngokubanzi | 4mm |
| I-Underlay (Ngokuzikhethela) | IXPE/EVA(1mm/1.5mm) |
| Nxiba umaleko | 0.2mm.(8 Mil.) |
| Ububanzi | 7.25" (184mm.) |
| Ubude | 48" (1220mm.) |
| Gqiba | Ukugquma kweUV |
| Inkqubo yokutshixa |
|
| Isicelo | EzoRhwebo kunye neNdawo yokuhlala |
Idatha yobuGcisa:
| SPC IRIGID-CORE PLANK IDATHA YOBUGCISA | ||
| Ulwazi lobuGcisa | Indlela yoVavanyo | Iziphumo |
| Ubukhulu | EN427 & | Dlula |
| Ukutyeba ngokupheleleyo | EN428 & | Dlula |
| Ukutyeba kweeleya zokunxiba | EN429 & | Dlula |
| Uzinzo lweDimensional | IOS 23999: 2018 & ASTM F2199-18 | Umkhombandlela wokuVeliswa ≤0.02% (82oC @ 6hrs) |
| Umkhombandlela wokuVeliswa kuwo wonke ≤0.03% (82oC @ 6hrs) | ||
| Ukugoqa (mm) | IOS 23999: 2018 & ASTM F2199-18 | Ixabiso 0.16mm(82oC @ 6hrs) |
| Amandla ePeel (N/25mm) | I-ASTM D903-98(2017) | Umkhombandlela wokuVeliswa 62 (uMndilili) |
| Umkhombandlela wokuVeliswa kuwo wonke 63 (uMndilili) | ||
| Umthwalo omileyo | I-ASTM F970-17 | iNtsalela yoHlengahlengiso:0.01mm |
| Intsalela yokuLandelwa | I-ASTM F1914-17 | Dlula |
| Ukunyangwa kwemikrwelo | ISO 1518-1: 2011 | Akukho yangena ingubo kumthwalo 20N |
| Amandla okutshixa(kN/m) | ISO 24334:2014 | Umkhombandlela wokuVelisa 4.9 kN/m |
| Kwimiba yoMveliso engaphaya kwe-3.1 kN/m | ||
| UkuKhawuleza koMbala ukuya kuKhanya | ISO 4892-3:2016 Umjikelo 1 & ISO105–A05:1993/Cor.2:2005&ASTM D2244-16 | ≥ 6 |
| Ukusabela kumlilo | BS EN14041:2018 Isiqendu 4.1 & EN 13501-1:2018 | I-Bfl-S1 |
| I-ASTM E648-17a | Iklasi yoku-1 | |
| I-ASTM E 84-18b | Iklasi A | |
| Ukukhutshwa kwe-VOC | I-BS EN 14041: 2018 | ND - Ukudlula |
| I-ROHS / Isinyithi esinzima | EN 71-3: 2013 + A3: 2018 | ND - Ukudlula |
| Fikelela | Hayi 1907/2006 FIKELELA | ND - Ukudlula |
| Ukukhutshwa kwe-formaldehyde | BS EN14041:2018 | Iklasi: E1 |
| Uvavanyo lwePhthalate | I-BS EN 14041: 2018 | ND - Ukudlula |
| PCP | I-BS EN 14041: 2018 | ND - Ukudlula |
| Ukufuduka kwezinto ezithile | EN 71 – 3:2013 | ND - Ukudlula |
Ukupakisha ulwazi:
| Ulwazi lokuPakisha(4.0mm) | |
| IiPC/ctn | 12 |
| Ubunzima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Ubunzima(KG)/GW | 24500 |
