Yangan Gray didan Marble Stone Design kosemi fainali Tile
Apejuwe:
Nkan:TYM 216
Sisanra:4.0mm ~ 8.0mm
Wọ Layer:0.2mm ~ 0.7mm
Isalẹ (iyan):Eva / IXPE, 1.0mm ~ 2.0mm
Iwọn:12 "X 24" / 12" X 12" / isọdi
TYM 216 jẹ tile fainali lile ti ko ni aabo ati pe o ni agbara iyasọtọ.Aṣayan ti o dara fun eniyan ni awọn ohun ọsin ni ile.Imudani ti o ga julọ ti mojuto ṣe alekun resistance ipa ati pese iduroṣinṣin to gaju.Iwọn tile deede jẹ 12 inches nipasẹ 24 inches.Pẹlu Uniclick titiipa, o rọrun lati fi sori ẹrọ ati rọpo.
Ilẹ-ilẹ mojuto lile jẹ 100% mabomire, ṣugbọn tun ni awọn iwo ti o wuyi, ati itunu labẹ ẹsẹ, o dara fun awọn ohun elo ibugbe ati ti iṣowo mejeeji.TYM 216 jẹ apẹrẹ ailakoko ti o yangan okuta didan grẹy ti ilẹ ti ilẹ.Pẹlu grẹy tutu, ilẹ-ilẹ yii le jẹ aṣiṣe fun okuta ododo.Maa ṣe jẹ ki yi pakà ká sojurigindin o tàn ọ, sibẹsibẹ!SPC rogbodiyan - okuta pilasitik apapo - ni a ṣẹda pẹlu limestone ki ilẹ-ilẹ rẹ yoo ni itunu lati rin lori, ṣugbọn lagbara bi okuta, fifun ni agbara lati ṣiṣe ni igbesi aye.Gba iwo okuta didan grẹy ni ile pẹlu awọn aṣa ilẹ ilẹ SPC wa ti o ṣe yiyan ti o lẹwa ati ilowo si ohun gidi.IXPE tabi EVA paadi le jẹ asopọ si atilẹyin tile ti o ba fẹ rirọ labẹ ẹsẹ.
| Sipesifikesonu | |
| Dada Texture | Igi sojurigindin |
| Ìwò Sisanra | 4mm |
| Underlay(aṣayan) | IXPE/EVA(1mm/1.5mm) |
| Wọ Layer | 0.3mm.(12 Milionu) |
| Ìbú | 12” (305mm.) |
| Gigun | 24” (610mm.) |
| Pari | Aso UV |
| Tẹ |  |
| Ohun elo | Iṣowo & Ibugbe |
| SPC RIGID-mojuto PLANK imọ DATA | ||
| Imọ Alaye | Ọna idanwo | Esi |
| Onisẹpo | EN427 & amupu; | Kọja |
| Sisanra lapapọ | EN428 & amupu; | Kọja |
| Sisanra ti yiya fẹlẹfẹlẹ | EN429 & amupu; | Kọja |
| Iduroṣinṣin Onisẹpo | IOS 23999: 2018 & ASTM F2199-18 | Ilana iṣelọpọ ≤0.02% (82oC @ 6 wakati) |
| Kọja Itọsọna iṣelọpọ ≤0.03% (82oC @ 6 wakati) | ||
| Curling (mm) | IOS 23999: 2018 & ASTM F2199-18 | Iye 0.16mm(82oC @ 6 wakati) |
| Agbara Peeli (N/25mm) | ASTM D903-98 (2017) | Ilana iṣelọpọ 62 (Apapọ) |
| Kọja Itọsọna iṣelọpọ 63 (Apapọ) | ||
| Aimi fifuye | ASTM F970-17 | Ifiweranṣẹ ti o ku: 0.01mm |
| Ti o ku Indentation | ASTM F1914-17 | Kọja |
| ibere Resistance | ISO 1518-1: 2011 | Ko si penetrated awọn ti a bo ni fifuye ti 20N |
| Titiipa Agbara (kN/m) | ISO 24334:2014 | Ilana iṣelọpọ 4.9 kN / m |
| Kọja Itọsọna iṣelọpọ 3.1 kN / m | ||
| Iyara awọ si Imọlẹ | ISO 4892-3: 2016 Cycle 1 & ISO105–A05:1993/Kọr.2:2005& ASTM D2244-16 | ≥ 6 |
| Ifesi si ina | BS EN14041: 2018 Abala 4.1 & EN 13501-1: 2018 | Bfl-S1 |
| ASTM E648-17a | Kilasi 1 | |
| ASTM E 84-18b | Kilasi A | |
| Awọn itujade VOC | BS EN 14041:2018 | ND - Pass |
| ROHS / Heavy Irin | EN 71-3: 2013 + A3: 2018 | ND - Pass |
| De ọdọ | Ko si 1907/2006 de ọdọ | ND - Pass |
| Formaldehyde itujade | BS EN14041:2018 | Kilasi: E1 |
| Idanwo Phthalate | BS EN 14041:2018 | ND - Pass |
| PCP | BS EN 14041:2018 | ND - Pass |
| Iṣilọ ti Awọn eroja | EN 71 – 3:2013 | ND - Pass |
| Alaye Iṣakojọpọ (4.0mm) | |
| Awọn PC/ctn | 12 |
| Àdánù(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Ìwọ̀n (KG)/GW | 24500 |
