Ina Resistant Adayeba SPC Fainali ti ilẹ tile
Apejuwe:
Nkan:TYM 212
Sisanra:4.0mm ~ 8.0mm
Wọ Layer:0.2mm ~ 0.7mm
Underlay (Aṣayan):Eva / IXPE, 1.0mm ~ 2.0mm
Iwọn:12 "X 24" / 12" X 12" / isọdi
TopJoy SPC fainali ti ilẹ dabi tile okuta gidi.Ilẹ-ilẹ SPC jẹ yiyan pipe fun ibugbe ati awọn iṣẹ akanṣe ti iṣowo, ọpọlọpọ awọn awọ ati awọn apẹrẹ ṣe igbadun ilẹ.Ilẹ-ilẹ SPC pẹlu eto titẹ le ṣafipamọ akoko ati owo rẹ lati fi sori ẹrọ.Ilẹ-ilẹ SPC jẹ yiyan ti o dara julọ lati ṣe ọṣọ ile rẹ.
Alaye ọja:
TopJoy SPC fainali tile tile ni sojurigindin igi to lagbara, titiipa titiipa, agbara nla, ati ipele giga, ti o baamu ilẹ igi.Ilẹ-ilẹ jẹ iduroṣinṣin, ti kii ṣe abuku ati ti kii ṣe wiwu.Lakoko alapapo labẹ ilẹ-ilẹ, ilẹ-ilẹ le koju iwọn otutu giga fun igba pipẹ, ati tu ooru silẹ ni deede, ṣe iṣeduro gbigbe ooru iyara ati fifipamọ agbara naa.
A pese ọpọlọpọ awọn awọ awọn aṣayan fun awọn yiyan rẹ.O dara lati lo ni ibi idana ounjẹ ati baluwe.
Ilẹ-ilẹ SPC kii ṣe majele ti, Ina-sooro, ti ko ni itọwo ati formaldehyde-ọfẹ.Didara ati iṣẹ ti awọn ọja ilẹ wa ni idaniloju nipasẹ ẹni-kẹta ominira, ti a ṣe ayẹwo ati idanwo ni atẹle ISO, CE, EN, awọn ibeere ASTM.Ilẹ ilẹ Tapjoy SPC le jẹ paadi lori tirẹ laisi lẹ pọ ati ikole ọjọgbọn.O ni sojurigindin okuta didan, pipin titiipa, agbara nla, ati ipele giga, baramu ilẹ-igi.
Tile ti ilẹ vinyl SPC jẹ ti o tọ ga julọ, nini resistance giga pupọ si awọn ehín ati awọn ibọri.Ti fi sori ẹrọ daradara ati itọju to pe, wọn le ṣiṣe to ọdun 20 tabi diẹ sii.
| Sipesifikesonu | |
| Dada Texture | Igi sojurigindin |
| Ìwò Sisanra | 4mm |
| Underlay (Aṣayan) | IXPE/EVA(1mm/1.5mm) |
| Wọ Layer | 0.2mm.(8 Milionu) |
| Ìbú | 12” (305mm.) |
| Gigun | 24” (610mm.) |
| Pari | Aso UV |
| Titiipa System |
|
| Ohun elo | Iṣowo & Ibugbe |
Data Imọ-ẹrọ:
 SPC RIGID-mojuto PLANK imọ DATA | ||
| Imọ Alaye | Ọna idanwo | Esi |
| Onisẹpo | EN427 & amupu; | Kọja |
| Sisanra lapapọ | EN428 & amupu; | Kọja |
| Sisanra ti yiya fẹlẹfẹlẹ | EN429 & amupu; | Kọja |
| Iduroṣinṣin Onisẹpo | IOS 23999: 2018 & ASTM F2199-18 | Ilana iṣelọpọ ≤0.02% (82oC @ 6 wakati) |
| Kọja Itọsọna iṣelọpọ ≤0.03% (82oC @ 6 wakati) | ||
| Curling (mm) | IOS 23999: 2018 & ASTM F2199-18 | Iye 0.16mm(82oC @ 6 wakati) |
| Agbara Peeli (N/25mm) | ASTM D903-98 (2017) | Ilana iṣelọpọ 62 (Apapọ) |
| Kọja Itọsọna iṣelọpọ 63 (Apapọ) | ||
| Aimi fifuye | ASTM F970-17 | Ifiweranṣẹ ti o ku: 0.01mm |
| Ti o ku Indentation | ASTM F1914-17 | Kọja |
| ibere Resistance | ISO 1518-1: 2011 | Ko si penetrated awọn ti a bo ni fifuye ti 20N |
| Titiipa Agbara (kN/m) | ISO 24334:2014 | Ilana iṣelọpọ 4.9 kN / m |
| Kọja Itọsọna iṣelọpọ 3.1 kN / m | ||
| Iyara awọ si Imọlẹ | ISO 4892-3: 2016 Cycle 1 & ISO105–A05:1993/Kọr.2:2005& ASTM D2244-16 | ≥ 6 |
| Ifesi si ina | BS EN14041: 2018 Abala 4.1 & EN 13501-1: 2018 | Bfl-S1 |
| ASTM E648-17a | Kilasi 1 | |
| ASTM E 84-18b | Kilasi A | |
| Awọn itujade VOC | BS EN 14041:2018 | ND - Pass |
| ROHS / Heavy Irin | EN 71-3: 2013 + A3: 2018 | ND - Pass |
| De ọdọ | Ko si 1907/2006 de ọdọ | ND - Pass |
| Formaldehyde itujade | BS EN14041:2018 | Kilasi: E1 |
| Idanwo Phthalate | BS EN 14041:2018 | ND - Pass |
| PCP | BS EN 14041:2018 | ND - Pass |
| Iṣilọ ti Awọn eroja | EN 71 – 3:2013 | ND - Pass |
Alaye Iṣakojọpọ:
| Alaye Iṣakojọpọ (4.0mm) | |
| Awọn PC/ctn | 12 |
| Àdánù(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Ìwọ̀n (KG)/GW | 24500 |
