Umphumela wethayela likakhonkolo wesitayela sezimboni chofoza ukukhiya i-vinyl flooring
Incazelo:
Ingxenye #:TPS004-A
Ubukhulu:4.0mm ~ 8.0mm
Isendlalelo sokugqoka:0.2mm ~ 0.7mm
I-underlay (Ongakukhetha):EVA/IXPE, 1.0mm~2.0mm
Usayizi:12” X 24”/ 18” X 18”/ 24” X 24”, Ukwenza ngokwezifiso
Amathayili we-vinyl wokukhiya i-SPC awatholakali kuphela ekubukeni kwezinkuni njengoba iningi labantu lazi.Iphinde iza nokhonkolo noma nomthelela wetshe onosayizi odumile ongu-12” x24 “no-24”x24” namuhla.Ubuchwepheshe obusha be-vinyl bokunethezeka obuhlangana nesitayela sesikole esidala buletha umoya okhethekile endaweni yakho.
I-TopJoy SPC icindezela i-flooring yokukhiya, Iqoqo: INDUSTRIE, ifaka umklamo wokuhlobisa owenziwe ngokhonkolo.Itholakala ngemibala emibili efana ne-Dark grey (Decor-A) kanye ne-Light grey (Decor-B), ilungele indawo yangaphakathi yesitayela sezimboni.Idizayini iphinda ihlangabezane nokunambitha okuncane kodwa ngokusebenza okwengeziwe.I-flooring ayigcini nje ngokungenwa amanzi ngo-100%, imelana namabala futhi ivumelana nemvelo kodwa futhi ifudumala ngaphansi kwezinyawo futhi imelana nokushelela ngomongo okhethekile we-SPC owenziwe ngobunjiniyela be-TopJoy kanye ne-wear lay.
Ithayela le-SPC lifakwe iphrofayili enamaphethelo ama-micro-bevel angu-4 anesistimu yokukhiya ye-Uniclic enelungelo lobunikazi, kulula kakhulu ukuyifaka nokuphinda isetshenziswe.Yiphansi elifaneleka kakhulu lephansi, igumbi elondolo noma izindawo zomphakathi ezifana nezindawo zobumnandi zezimboni, amabha noma ezinye izindawo ezibona ukugcwala kwabantu abaningi kodwa ngesabelomali esilinganiselwe.
| Ukucaciswa | |
| Ukwakheka Kobuso | Ukwakheka Kwezinkuni |
| Ubukhulu Sebonke | 4mm |
| I-underlay (Ongakukhetha) | I-IXPE/EVA(1mm/1.5mm) |
| Gqoka Isendlalelo | 0.2mm.(8 Mil.) |
| Ububanzi | 7.25" (184mm.) |
| Ubude | 48" (1220mm.) |
| Qeda | I-UV Coating |
| Uhlelo lokukhiya |
|
| Isicelo | Ezohwebo Nezindawo Zokuhlala |
Idatha Yezobuchwepheshe:
| IDATHA YOBUCHWEPHESHE YE-SPC RIGID-CORE PLANK | ||
| Ulwazi Lobuchwepheshe | Indlela Yokuhlola | Imiphumela |
| I-Dimensional | I-EN427 & | Dlula |
| Ubukhulu ngokuphelele | I-EN428 & | Dlula |
| Ubukhulu bezendlalelo zokugqoka | I-EN429 & | Dlula |
| Ukuzinza kweDimensional | I-IOS 23999:2018 ne-ASTM F2199-18 | Izikhombisi-ndlela Zokukhiqiza ≤0.02% (82oC @ 6hrs) |
| Kuzo zonke izikhombisi-ndlela zokukhiqiza ≤0.03% (82oC @ 6hrs) | ||
| Ukugoqa (mm) | I-IOS 23999:2018 ne-ASTM F2199-18 | Ivelu 0.16mm(82oC @ 6hrs) |
| Amandla Ekhasi (N/25mm) | I-ASTM D903-98(2017) | I-Manufacturing Direction 62 (Isilinganiso) |
| I-Direct Manufacture Direction 63 (Isilinganiso) | ||
| I-Static Load | I-ASTM F970-17 | Ukuhlehliswa Okusele:0.01mm |
| Ukuhlehliswa Kwezinsalela | I-ASTM F1914-17 | Dlula |
| I-Scratch Resistance | ISO 1518-1:2011 | Akukho kungene i-coating ekulayisheni okungu-20N |
| Amandla Okukhiya(kN/m) | ISO 24334:2014 | Isikhombisi-ndlela Sokukhiqiza 4.9 kN/m |
| Kuzo zonke izikhombisi-ndlela Zokukhiqiza 3.1 kN/m | ||
| Ukushesha Kombala Ekukhanyeni | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005&ASTM D2244-16 | ≥ 6 |
| Ukusabela emlilweni | I-BS EN14041:2018 Isigaba somthetho 4.1 & EN 13501-1:2018 | I-Bfl-S1 |
| I-ASTM E648-17a | Ikilasi 1 | |
| I-ASTM E 84-18b | Ikilasi A | |
| Ukukhishwa kwe-VOC | I-BS EN 14041:2018 | ND - Dlula |
| I-ROHS/Insimbi Enzima | EN 71-3:2013+A3:2018 | ND - Dlula |
| Finyelela | No 1907/2006 REACH | ND - Dlula |
| Ukukhishwa kwe-formaldehyde | I-BS EN14041:2018 | Ikilasi: E1 |
| Ukuhlolwa kwe-Phthalate | I-BS EN 14041:2018 | ND - Dlula |
| I-PCP | I-BS EN 14041:2018 | ND - Dlula |
| Ukufuduka Kwezinto Ezithize | EN 71 – 3:2013 | ND - Dlula |
Ukupakisha Ulwazi:
| Ulwazi Lokupakisha(4.0mm) | |
| Ama-PC/ctn | 12 |
| Isisindo(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Isisindo(KG)/GW | 24500 |
