Iphansi lesimanjemanje elimhlophe le-Coral Reef Hard Core
Incazelo:
Into:986-11s
Ubukhulu:4.0mm ~ 8.0mm
Gqoka Isendlalelo:0.2mm ~ 0.7mm
I-Underlay(Ongakukhetha):EVA/IXPE, 1.0mm~2.0mm
Usayizi:12” X 24”/ 12” X 12”/ Ukwenza ngokwezifiso
I-White coral reef hardcore flooring yakhelwe hhayi kuphela indawo yokubeka phansi kodwa futhi nodonga.Iphethini yayo enhle yamukelwa yimakethe.Leli thayela lingangena esikhundleni samathayili e-ceramic kahle ngentengo ephansi nokusebenza okuphelele.
I-TopJoy 986-11s amapulangwe e-coral reef hardcore vinyl asungulwe ukuze athathele indawo amathayela e-ceramic, ngokuya ngezinto ezimbalwa ezilandelayo.
Okokuqala, i-ceramic tile inzima kakhulu, okusho ukuthi izobiza kakhulu ngesikhathi sokuthutha.
Okwesibili, i-ceramic tile kulula ukuphuka.Inhlolovo ikhombisa amazinga aphezulu okubuya ekuthengisweni kwamathayela e-ceramic.
Okwesithathu, kuzoba nokungcoliswa kwemvelo ngesikhathi sokukhiqizwa kwe-ceramic.
Okokugcina, ukumelana nokushelela kwethayela le-ceramic kuphansi kakhulu!Kuyingozi kakhulu lapho izingane kanye nabantu abadala behamba endaweni emanzi ye-ceramic.
Ngakho-ke, i-TopJoy hardcore tile inokusebenza kanzima okufanayo, kodwa intengo iyingxenye eyodwa kwezinhlanu zethayela le-ceramic iyunithi ngayinye.Nakuba i-TopJoy hardcore flooring inokuminyana okuphezulu, isisindo silula kunamathayela e-ceramic.I-TopJoy vinyl plannk flooring eyenziwe ngezinto ezimsulwa futhi eco-friendly, ephumelele ukuhlolwa kwe-VOC ukufakazela ukuthi akuwona umphumela olimazayo empilweni.I-surface ye-986-11s ine-anti-slip wear layer, ehlinzeka indawo ephephile yemindeni.
| Ukucaciswa | |
| Ukwakheka Kobuso | Ukwakheka Kwezinkuni |
| Ubukhulu Sebonke | 4mm |
| I-underlay(Uma uthanda) | I-IXPE/EVA(1mm/1.5mm) |
| Gqoka Isendlalelo | 0.3mm.(12 Mil.) |
| Ububanzi | 12” (305mm.) |
| Ubude | 24” (610mm.) |
| Qeda | I-UV Coating |
| Chofoza |  |
| Isicelo | Ezohwebo Nezindawo Zokuhlala |
| IDATHA YOBUCHWEPHESHE YE-SPC RIGID-CORE PLANK | ||
| Ulwazi Lobuchwepheshe | Indlela Yokuhlola | Imiphumela |
| I-Dimensional | I-EN427 & | Dlula |
| Ubukhulu ngokuphelele | I-EN428 & | Dlula |
| Ubukhulu bezendlalelo zokugqoka | I-EN429 & | Dlula |
| Ukuzinza kweDimensional | I-IOS 23999:2018 ne-ASTM F2199-18 | Izikhombisi-ndlela Zokukhiqiza ≤0.02% (82oC @ 6hrs) |
| Kuzo zonke izikhombisi-ndlela zokukhiqiza ≤0.03% (82oC @ 6hrs) | ||
| Ukugoqa (mm) | I-IOS 23999:2018 ne-ASTM F2199-18 | Ivelu 0.16mm(82oC @ 6hrs) |
| Amandla Ekhasi (N/25mm) | I-ASTM D903-98(2017) | I-Manufacturing Direction 62 (Isilinganiso) |
| I-Direct Manufacture Direction 63 (Isilinganiso) | ||
| I-Static Load | I-ASTM F970-17 | Ukuhlehliswa Okusele:0.01mm |
| Ukuhlehliswa Kwezinsalela | I-ASTM F1914-17 | Dlula |
| I-Scratch Resistance | ISO 1518-1:2011 | Akukho kungene i-coating ekulayisheni okungu-20N |
| Amandla Okukhiya(kN/m) | ISO 24334:2014 | Isikhombisi-ndlela Sokukhiqiza 4.9 kN/m |
| Kuzo zonke izikhombisi-ndlela Zokukhiqiza 3.1 kN/m | ||
| Ukushesha Kombala Ekukhanyeni | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005&ASTM D2244-16 | ≥ 6 |
| Ukusabela emlilweni | I-BS EN14041:2018 Isigaba somthetho 4.1 & EN 13501-1:2018 | I-Bfl-S1 |
| I-ASTM E648-17a | Ikilasi 1 | |
| I-ASTM E 84-18b | Ikilasi A | |
| Ukukhishwa kwe-VOC | I-BS EN 14041:2018 | ND - Dlula |
| I-ROHS/Insimbi Enzima | EN 71-3:2013+A3:2018 | ND - Dlula |
| Finyelela | No 1907/2006 REACH | ND - Dlula |
| Ukukhishwa kwe-formaldehyde | I-BS EN14041:2018 | Ikilasi: E1 |
| Ukuhlolwa kwe-Phthalate | I-BS EN 14041:2018 | ND - Dlula |
| I-PCP | I-BS EN 14041:2018 | ND - Dlula |
| Ukufuduka Kwezinto Ezithize | EN 71 – 3:2013 | ND - Dlula |
| Ulwazi Lokupakisha(4.0mm) | |
| Ama-PC/ctn | 12 |
| Isisindo(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Isisindo(KG)/GW | 24500 |
