Isitayela Esisha Sezimboni Sesimende Esibukeka Ngaphansi Se-SPC
Incazelo:
Into:I-TYM508
Ubukhulu:4.0mm ~ 8.0mm
Isendlalelo sokugqoka:0.2mm ~ 0.7mm
I-underlay (Ongakukhetha):EVA/IXPE, 1.0mm~2.0mm
Usayizi:12” X 24”/ 12” X 12”/ Ukwenza ngokwezifiso
Njengoba ukusebenza kahle kwe-SPC flooring kwenza ezindaweni zokuhweba, amaphethini ahlukahlukene ayadingeka ukuze i-SPC flooring ihlangabezane nezitayela ezahlukene zokuhlobisa.Namuhla, phansi ngamaphethini okhonkolo kasimende amukelwa abantu abasha, okunganikeza abantu umqondo opholile kanye nomqondo we-avant-garde.
Imininingwane Yomkhiqizo:
Ukuhlobisa "kwezimboni" kuhambisana nabantu njengokubukeka okukhululekile, kwesimanje.Indlu efakwe ngesitayela semboni iyakwazi ukudala isimo sesimanje esiyinkimbinkimbi esinomuzwa wangempela nokuhlala ngaphakathi.Izitezi kufanele zihambisane nomoya omubi wezinto ezingaphathwanga.Isitayela sethu se-vinyl flooring esinesitayela, esisha, isixazululo se-hi-tech kwenza amathayili abe nezinto ezihlukahlukene nakakhulu.Iphansi le-SPC elivumela imvelo lithwebula ingqikithi yesitayela osifisayo ngebhalansi yaso ephelele yemibala, indlela yokwenza, nobubanzi.Izitezi ezinetshe elinesimo sezulu zibukeka zihambisana nomthethosivivinywa.Lesi sitayela sengeza imfudumalo ne-nostalgia kunoma yiliphi igumbi.Cabanga ngezitezi ezimbonini ezindala.Yilokho ofuna ukukuzuza.Uma kuqhathaniswa nezitezi zangempela zikasimende, ukufakwa kwethu phansi kukasimende kwe-TYM508 SPC kungakusiza ukuthi wonge isikhathi esiningi nezindleko zomsebenzi ezinqubweni zephansi likasimende futhi zikunikeze umuzwa ofudumele wonyawo.Njengoba indawo yethu yaphansi ye-SPC isebenzisa isistimu yokukhiya elula, abantu bangafaka izitezi zethu ngemiyalo yokufaka ngesikhathi esincane kakhulu.
| Ukucaciswa | |
| Ukwakheka Kobuso | Ukwakheka Kwezinkuni |
| Ubukhulu Sebonke | 4mm |
| I-underlay (Ongakukhetha) | I-IXPE/EVA(1mm/1.5mm) |
| Gqoka Isendlalelo | 0.2mm.(8 Mil.) |
| Ububanzi | 12” (305mm.) |
| Ubude | 24” (610mm.) |
| Qeda | I-UV Coating |
| Uhlelo lokukhiya |
|
| Isicelo | Ezohwebo Nezindawo Zokuhlala |
Idatha Yezobuchwepheshe:
 IDATHA YOBUCHWEPHESHE YE-SPC RIGID-CORE PLANK | ||
| Ulwazi Lobuchwepheshe | Indlela Yokuhlola | Imiphumela |
| I-Dimensional | I-EN427 & | Dlula |
| Ubukhulu ngokuphelele | I-EN428 & | Dlula |
| Ubukhulu bezendlalelo zokugqoka | I-EN429 & | Dlula |
| Ukuzinza kweDimensional | I-IOS 23999:2018 ne-ASTM F2199-18 | Izikhombisi-ndlela Zokukhiqiza ≤0.02% (82oC @ 6hrs) |
| Kuzo zonke izikhombisi-ndlela zokukhiqiza ≤0.03% (82oC @ 6hrs) | ||
| Ukugoqa (mm) | I-IOS 23999:2018 ne-ASTM F2199-18 | Ivelu 0.16mm(82oC @ 6hrs) |
| Amandla Ekhasi (N/25mm) | I-ASTM D903-98(2017) | I-Manufacturing Direction 62 (Isilinganiso) |
| I-Direct Manufacture Direction 63 (Isilinganiso) | ||
| I-Static Load | I-ASTM F970-17 | Ukuhlehliswa Okusele:0.01mm |
| Ukuhlehliswa Kwezinsalela | I-ASTM F1914-17 | Dlula |
| I-Scratch Resistance | ISO 1518-1:2011 | Akukho kungene i-coating ekulayisheni okungu-20N |
| Amandla Okukhiya(kN/m) | ISO 24334:2014 | Isikhombisi-ndlela Sokukhiqiza 4.9 kN/m |
| Kuzo zonke izikhombisi-ndlela Zokukhiqiza 3.1 kN/m | ||
| Ukushesha Kombala Ekukhanyeni | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005&ASTM D2244-16 | ≥ 6 |
| Ukusabela emlilweni | I-BS EN14041:2018 Isigaba somthetho 4.1 & EN 13501-1:2018 | I-Bfl-S1 |
| I-ASTM E648-17a | Ikilasi 1 | |
| I-ASTM E 84-18b | Ikilasi A | |
| Ukukhishwa kwe-VOC | I-BS EN 14041:2018 | ND - Dlula |
| I-ROHS/Insimbi Enzima | EN 71-3:2013+A3:2018 | ND - Dlula |
| Finyelela | No 1907/2006 REACH | ND - Dlula |
| Ukukhishwa kwe-formaldehyde | I-BS EN14041:2018 | Ikilasi: E1 |
| Ukuhlolwa kwe-Phthalate | I-BS EN 14041:2018 | ND - Dlula |
| I-PCP | I-BS EN 14041:2018 | ND - Dlula |
| Ukufuduka Kwezinto Ezithize | EN 71 – 3:2013 | ND - Dlula |
Ukupakisha Ulwazi:
| Ulwazi Lokupakisha(4.0mm) | |
| Ama-PC/ctn | 12 |
| Isisindo(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Isisindo(KG)/GW | 24500 |
