Iphethini yetshe SPC RIGID CORE PLANK
Incazelo:
Into:I-TYM 211
Ubukhulu:4.0mm ~ 8.0mm
Isendlalelo sokugqoka:0.2mm ~ 0.7mm
I-underlay (Ongakukhetha):EVA/IXPE, 1.0mm~2.0mm
Usayizi:12” X 24”/ 12” X 12”/ Ukwenza ngokwezifiso
I-Stone Rigid core SPC ipulangwe yaphansi ifaka ukuzinza okukhulu, ukuqina komthelela ophezulu kanye nedizayini ewina umklomelo yokubeka phansi okunethezeka.Iphansi lepulangwe le-TopJoy Rigid Core SPC ali-100% lingangeni manzi, lilungele izilwane ezifuywayo, futhi lilwa nomuhlwa.I-SPC flooring ingasetshenziswa ngokushesha ngemva kokufakwa.Futhi ipulangwe eliwumgogodla we-SPC kulula ukuliqaqa nokuphinda lisetshenziswe.
Imininingwane Yomkhiqizo:
Iphethini yetshe le-TopJoy ye-SPC eqinile ewumgogodla wepulangwe ibhekwa njengesizukulwane esisha sokumboza phansi.
I-SPC rigid core plannk flooring iza nelokhi yenkampani ye-Unilin.Futhi sisebenzisa imishini yokusika yejubane eliphezulu yaseJalimane, ubuchwepheshe bokusika obunembayo, ukusika i-engeli elungile ephelele.Sinendawo ebushelelezi futhi engenamthungo.
Vikela phansi uma amanzi egeleza ngephutha.Ingafakwa kalula ohlotsheni oluhlukile lwesisekelo se-flooring, kungaba ukhonkolo, i-ceramic noma i-flooring ekhona.
I-TopJoy yamukela i-OEM futhi yenza umklamo ngendlela oyifisayo.Kunezinkulungwane zamaphethini ozikhethele wona.Ubude be-SPC Flooring, ububanzi, nokuqina kungenziwa ngokwezifiso ngokuya ngesidingo sakho.Ubukhulu obujwayelekile bungu-4mm-8mm.Futhi i-IXPE/EVA underlay ukwenza i-rigid core flooring ibe ngcono nomsindo ozwakalayo ongaphansi kwezinyawo.Umgogodla oqinile wesiginesha we-SPC cishe awunakonakala, okuyenza ibe inketho ekahle ezindaweni ezinethrafikhi ephezulu nezohwebo.
| Ukucaciswa | |
| Ukwakheka Kobuso | Ukwakheka Kwezinkuni |
| Ubukhulu Sebonke | 4mm |
| I-underlay (Ongakukhetha) | I-IXPE/EVA(1mm/1.5mm) |
| Gqoka Isendlalelo | 0.2mm.(8 Mil.) |
| Ububanzi | 12” (305mm.) |
| Ubude | 24” (610mm.) |
| Qeda | I-UV Coating |
| Uhlelo lokukhiya |
|
| Isicelo | Ezohwebo Nezindawo Zokuhlala |
Idatha Yezobuchwepheshe:
 IDATHA YOBUCHWEPHESHE YE-SPC RIGID-CORE PLANK | ||
| Ulwazi Lobuchwepheshe | Indlela Yokuhlola | Imiphumela |
| I-Dimensional | I-EN427 & | Dlula |
| Ubukhulu ngokuphelele | I-EN428 & | Dlula |
| Ubukhulu bezendlalelo zokugqoka | I-EN429 & | Dlula |
| Ukuzinza kweDimensional | I-IOS 23999:2018 ne-ASTM F2199-18 | Izikhombisi-ndlela Zokukhiqiza ≤0.02% (82oC @ 6hrs) |
| Kuzo zonke izikhombisi-ndlela zokukhiqiza ≤0.03% (82oC @ 6hrs) | ||
| Ukugoqa (mm) | I-IOS 23999:2018 ne-ASTM F2199-18 | Ivelu 0.16mm(82oC @ 6hrs) |
| Amandla Ekhasi (N/25mm) | I-ASTM D903-98(2017) | I-Manufacturing Direction 62 (Isilinganiso) |
| I-Direct Manufacture Direction 63 (Isilinganiso) | ||
| I-Static Load | I-ASTM F970-17 | Ukuhlehliswa Okusele:0.01mm |
| Ukuhlehliswa Kwezinsalela | I-ASTM F1914-17 | Dlula |
| I-Scratch Resistance | ISO 1518-1:2011 | Akukho kungene i-coating ekulayisheni okungu-20N |
| Amandla Okukhiya(kN/m) | ISO 24334:2014 | Isikhombisi-ndlela Sokukhiqiza 4.9 kN/m |
| Kuzo zonke izikhombisi-ndlela Zokukhiqiza 3.1 kN/m | ||
| Ukushesha Kombala Ekukhanyeni | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005&ASTM D2244-16 | ≥ 6 |
| Ukusabela emlilweni | I-BS EN14041:2018 Isigaba somthetho 4.1 & EN 13501-1:2018 | I-Bfl-S1 |
| I-ASTM E648-17a | Ikilasi 1 | |
| I-ASTM E 84-18b | Ikilasi A | |
| Ukukhishwa kwe-VOC | I-BS EN 14041:2018 | ND - Dlula |
| I-ROHS/Insimbi Enzima | EN 71-3:2013+A3:2018 | ND - Dlula |
| Finyelela | No 1907/2006 REACH | ND - Dlula |
| Ukukhishwa kwe-formaldehyde | I-BS EN14041:2018 | Ikilasi: E1 |
| Ukuhlolwa kwe-Phthalate | I-BS EN 14041:2018 | ND - Dlula |
| I-PCP | I-BS EN 14041:2018 | ND - Dlula |
| Ukufuduka Kwezinto Ezithize | EN 71 – 3:2013 | ND - Dlula |
Ukupakisha Ulwazi:
| Ulwazi Lokupakisha(4.0mm) | |
| Ama-PC/ctn | 12 |
| Isisindo(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Isisindo(KG)/GW | 24500 |
