Iphethini yetshe engangeni manzi I-Rigid Core Vinyl flooring ene
Incazelo:
Into:I-TPS009-C
Ubukhulu:4.0mm ~ 8.0mm
Isendlalelo sokugqoka:0.2mm ~ 0.7mm
I-underlay (Ongakukhetha):EVA/IXPE, 1.0mm~2.0mm
Usayizi:12” X 24”/ 18” X 18”/ 24” X 24”, Ukwenza ngokwezifiso
Ngokukhetha i-vinyl flooring yobunjiniyela ngephethini yamatshe, ungajabulela ubuhle bezinto ezifana ne-slate, ezithwetshulwe ngobuciko ku-vinyl-look vinyl flooring.Noma yiliphi igumbi lekhaya lakho lilungile, ngisho nangaphansi kwethrafikhi ephezulu, umswakama ophezulu kanye nomthelela omkhulu.
Ihlanganiswe nempushana ye-limestone yemvelo, i-polyvinyl chloride, nezinzinzisi, i-SPC rigid core vinyl iyimpumelelo entsha esigcawini se-vinyl flooring.Ngomgogodla ongu-100% ongenamanzi, ominyene ngendlela emangalisayo, i-SPC flooring ingamelana nezidingo zendlela yakho yansuku zonke.Yifake kunoma yiliphi igumbi, ngisho emakhishini, ezindlini zangasese, ezindlini zodaka nangaphansi.Uma echayeke emanzini amapulangwe ethu ngeke avuvuke, abophe noma alahlekelwe ubuqotho.
Kule phethini yetshe le-spc flooring, i-TPS009-C, ukujiya kungaba ngu-4.0/5.0/6.0 mm noma kwenziwe ngendlela oyifisayo, usayizi ojwayelekile ngu-12'' X 24''.Nakuba ingencane kakhulu, iqinile impela uma iqhathaniswa nogqinsi olufanayo lwezinye izinhlobo ze-flooring, ngakho izizwa izinze futhi igxilile lapho uhamba kuyo.
Ngokusebenzisa isistimu yokuchofoza ye-Unilin enelungelo lobunikazi, ingafakwa uwena futhi yonge izindleko zabasebenzi.Zingabekwa phezu kwezinhlobo eziningi ezahlukene zama-subfloors noma i-flooring ekhona.Ukuchofoza nje endaweni kuzolunga.
| Ukucaciswa | |
| Ukwakheka Kobuso | Ukwakheka Kwezinkuni |
| Ubukhulu Sebonke | 4mm |
| I-underlay (Ongakukhetha) | I-IXPE/EVA(1mm/1.5mm) |
| Gqoka Isendlalelo | 0.2mm.(8 Mil.) |
| Ububanzi | 7.25" (184mm.) |
| Ubude | 48" (1220mm.) |
| Qeda | I-UV Coating |
| Uhlelo lokukhiya |
|
| Isicelo | Ezohwebo Nezindawo Zokuhlala |
Idatha Yezobuchwepheshe:
| IDATHA YOBUCHWEPHESHE YE-SPC RIGID-CORE PLANK | ||
| Ulwazi Lobuchwepheshe | Indlela Yokuhlola | Imiphumela |
| I-Dimensional | I-EN427 & | Dlula |
| Ubukhulu ngokuphelele | I-EN428 & | Dlula |
| Ubukhulu bezendlalelo zokugqoka | I-EN429 & | Dlula |
| Ukuzinza kweDimensional | I-IOS 23999:2018 ne-ASTM F2199-18 | Izikhombisi-ndlela Zokukhiqiza ≤0.02% (82oC @ 6hrs) |
| Kuzo zonke izikhombisi-ndlela zokukhiqiza ≤0.03% (82oC @ 6hrs) | ||
| Ukugoqa (mm) | I-IOS 23999:2018 ne-ASTM F2199-18 | Ivelu 0.16mm(82oC @ 6hrs) |
| Amandla Ekhasi (N/25mm) | I-ASTM D903-98(2017) | I-Manufacturing Direction 62 (Isilinganiso) |
| I-Direct Manufacture Direction 63 (Isilinganiso) | ||
| I-Static Load | I-ASTM F970-17 | Ukuhlehliswa Okusele:0.01mm |
| Ukuhlehliswa Kwezinsalela | I-ASTM F1914-17 | Dlula |
| I-Scratch Resistance | ISO 1518-1:2011 | Akukho kungene i-coating ekulayisheni okungu-20N |
| Amandla Okukhiya(kN/m) | ISO 24334:2014 | Isikhombisi-ndlela Sokukhiqiza 4.9 kN/m |
| Kuzo zonke izikhombisi-ndlela Zokukhiqiza 3.1 kN/m | ||
| Ukushesha Kombala Ekukhanyeni | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005&ASTM D2244-16 | ≥ 6 |
| Ukusabela emlilweni | I-BS EN14041:2018 Isigaba somthetho 4.1 & EN 13501-1:2018 | I-Bfl-S1 |
| I-ASTM E648-17a | Ikilasi 1 | |
| I-ASTM E 84-18b | Ikilasi A | |
| Ukukhishwa kwe-VOC | I-BS EN 14041:2018 | ND - Dlula |
| I-ROHS/Insimbi Enzima | EN 71-3:2013+A3:2018 | ND - Dlula |
| Finyelela | No 1907/2006 REACH | ND - Dlula |
| Ukukhishwa kwe-formaldehyde | I-BS EN14041:2018 | Ikilasi: E1 |
| Ukuhlolwa kwe-Phthalate | I-BS EN 14041:2018 | ND - Dlula |
| I-PCP | I-BS EN 14041:2018 | ND - Dlula |
| Ukufuduka Kwezinto Ezithize | EN 71 – 3:2013 | ND - Dlula |
Ukupakisha Ulwazi:
| Ulwazi Lokupakisha(4.0mm) | |
| Ama-PC/ctn | 12 |
| Isisindo(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Isisindo(KG)/GW | 24500 |
