Danna Shigar da bene na Vinyl
Bayani:
Abu:JSD01
Kauri:4.0mm ~ 8.0mm
Saka Layer:0.2mm ~ 0.7mm
Ƙarƙashin ƙasa(Na zaɓi):EVA / IXPE, 1.0mm ~ 2.0mm
Girman:7.25''X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Daidaitawa
Shigar da tsarin kulle Unilin don sauƙi, ƙarfi da amintaccen shigarwa
Duk shimfidar bene na SPC sun ɗauki Unilin danna ko Unipush don sauƙin shigarwa da DIY.
5mm kauri ya dace da kasuwanci da mazaunin gida.
SPC bene yana da cikakkun takaddun shaida don shiga ƙasar ku.
SPC vinyl bene yana da sauƙin shigarwa. Yana da kusan 50% sauri fiye da manne na gargajiya.Tare da tsarin kulle uniclick da unipush, shigarwa iskar ce ga duk wanda abin ya shafa.Don tsarin dannawa na musamman, mutane suna sakawa a saman bene na yanzu kuma suna jan sama idan sun tafi ba tare da lalata komai ba.Don haka yana da kyau a yi amfani da shi a cikin nunin, gidajen haya da sauransu.Ana buƙatar kawai wuka mai amfani don yankan, TopJoy yana ba da sassauci don daidaitawa zuwa wurare masu tsauri yayin kiyaye isasshen ƙarfi don ba da izinin shigarwa akan ƙasa mara kyau.Danna bene na vinyl baya buƙatar ƙwararren mai sakawa don taimakawa abokan ciniki don girka.Mu kawai shigar da danna vinyl bene da kanmu.Wannan shigarwa mai inganci yana adana mabukaci duka lokaci da kuɗi.Danna shigarwa vinyl bene suna da hanyoyi daban-daban don shigar da kanka.Hanyoyin shigarwa sun haɗa da bazuwar digiri 90, digiri 45 bazuwar, salon jirgin karkashin kasa digiri 90, salon jirgin karkashin kasa digiri 45, digiri na herringbone 90, 45 digiri herringbone da DIY zane.
| Ƙayyadaddun bayanai | |
| Surface Texture | Itace Texture |
| Gabaɗaya Kauri | 7mm ku |
| Ƙarƙashin ƙasa (Na zaɓi) | IXPE/EVA(1mm/1.5mm) |
| Saka Layer | 0.5mm ku.(mil 20) |
| Nisa | 6" (152mm) |
| Tsawon | 36" (914mm.) |
| Gama | Rufin UV |
| Danna |  |
| Aikace-aikace | Kasuwanci & Gidan zama |
| SPC RIGID-CORE PLANK TECHNICAL DATA | ||
| Bayanin Fasaha | Hanyar Gwaji | Sakamako |
| Girma | EN427 | Wuce |
| Kauri a duka | EN428 | Wuce |
| Kauri na lalacewa yadudduka | EN429 | Wuce |
| Girman Kwanciyar hankali | IOS 23999: 2018 & ASTM F2199-18 | Jagoran Masana'antu ≤0.02% (82oC @ 6hrs) |
| Gaba ɗaya Jagoran Kera ≤0.03% (82oC @ 6hrs) | ||
| Curling (mm) | IOS 23999: 2018 & ASTM F2199-18 | Darajar 0.16mm(82oC @ 6hrs) |
| Ƙarfin Kwasfa (N/25mm) | ASTM D903-98 (2017) | Hanyar Masana'antu 62 (Matsakaici) |
| Tsallake Hanyar Kera 63 (Matsakaici) | ||
| Load a tsaye | Saukewa: ASTM F970-17 | Ragowar Shiga:0.01mm |
| Ragowar Shiga | Saukewa: ASTM F1914-17 | Wuce |
| Resistance Scratch | ISO 1518-1: 2011 | Babu shiga cikin shafi a nauyin 20N |
| Ƙarfin Kulle (kN/m) | ISO 24334: 2014 | Jagoran Masana'antu 4.9 kN/m |
| Ko'ina Jagoran Masana'antu 3.1 kN/m | ||
| Saurin Launi zuwa Haske | ISO 4892-3: 2016 Zagayowar 1 & ISO105–A05:1993/Kor.2:2005& ASTM D2244-16 | ≥ 6 |
| Martani ga wuta | TS EN 14041: 2018 Sashe na 4.1 & EN 13501-1: 2018 | Bfl-S1 |
| ASTM E648-17A | Darasi na 1 | |
| ASTM E84-18b | Darasi A | |
| Fitowar VOC | TS EN 14041: 2018 | ND - Shiga |
| ROHS/Heavy Metal | EN 71-3:2013+A3:2018 | ND - Shiga |
| Isa | A'a 1907/2006 GASKIYA | ND - Shiga |
| Formaldehyde watsi | TS EN 14041: 2018 | Darasi: E1 |
| Gwajin Phthalate | TS EN 14041: 2018 | ND - Shiga |
| PCP | TS EN 14041: 2018 | ND - Shiga |
| Hijira na Wasu Abubuwa | EN 71 – 3:2013 | ND - Shiga |
| Bayanin tattarawa (4.0mm) | |
| PC/ctn | 12 |
| Nauyi(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Nauyi(KG)/GW | 24500 |
