Brown Oak SPC Flooring e nang le IXPE Pad
Tlhaloso:
Ntho:JSA10
Botenya:4.0mm ~ 8.0mm
Apara Layer:0.2mm ~ 0.7mm
Katlase (Taba ea boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Customization
SPC Flooring e nang le IXPE foam insulation support e hapa mohau oa batho ba bangata.E fana ka maikutlo a matle a maoto 'me e na le molumo o phahameng oa pound-for-pound.TopJoy e fana ka botenya ba 1.0mm le 1.5mm IXPE pad.
Ho fumana boikutlo bo betere ba leoto le tšobotsi ea ho monya molumo, re eketsa letlapa le ts'oenyehileng ka morao ho lepolanka la SPC.Ho na le lisebelisoa tse fapaneng tsa pad pad, joalo ka IXPE, EVA le cork.Ho monya molumo ho bohlokoa haholo malapeng a mekato e mengata, a malapa a le mong, li-condos, lifoleteng le liofising tse mekato e mengata le meahong ea lihotele.JSA10 e shebahala e sootho ea oak, ka bokaholimo bona le pad ea IXPE, e fetoha e 'ngoe ea tse rekisoang ka ho fetesisa.
Ho kenngoa ho tšoana leha e le efe ea "shock pad", e nang le pad kapa ntle le eona.Botenya ba JSA10 ke 4.0mm ntle le pad shock.Botenya ba IXPE hangata ke 1.0mm, 1.5mm.Kahoo botenya bohle ba JSA10 bo ka ba 5.0mm le 6.0mm.Mabapi le boiketlo, bakeng sa fatše ka thata holim'a fatše, seaparo sa boleng bo phahameng sa foam se ka nolofatsa maikutlo a ho tsamaea fatše, haholo-holo ka SPC e mosesaane le lepolanka la vinyl.IXPE pad e ka sireletsa lepolanka ka litsela tse sa tšoaneng, tse kang ho fokotsa ho kena ha metsi, ho senya le ho phunyeha hammoho le ho thusa ho fokotsa molumo.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ha ho boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.3 limilimithara.(12 Mil.) |
| Bophara | 7.25" (184mm.) |
| Bolelele | 48" (1220mm.) |
| Qetella | Ho roala ha UV |
| Tobetsa |  |
| Kopo | Khoebo & Bolulo |
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
