Metsi Back SPC Rigid Core Wood Grain Finish
Tlhaloso:
Ntho:JSD30
Botenya:4.0mm ~ 8.0mm
Apara Layer:0.2mm ~ 0.7mm
Katlase (Taba ea boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Customization
100% e sa keneleng metsi ebile e bonolo ho e hloekisa, u ka e sebelisa sebakeng leha e le sefe sa kamore ea hau.Superior scuff le lehong la sebele le shebahala.Mokhoa oa ho khabisa o etsa hore ho be le sebopeho sa sebele sa lehong.
Mekhoa ea ho etsa fatše e tla ba efe lilemong tse 'maloa tse tlang?Ha e kenele metsi.E kopantsoe le phofo ea tlhaho ea limestone, polyvinyl chloride, le li-stabilizers, setsi sa SPC se fana ka ts'ebetso e ke keng ea lekanngoa ho hanyetsa mongobo.Ho fapana le lehong le thata, fatše la laminated kapa LVT ea setso, e ka kenngoa libakeng tsa ntlo tse kang likamore tsa ho hlatsoetsa liaparo, likamore tsa ho hlapela, likamore tse ka tlaase le kichine.Karolo e sa keneleng metsi e boetse e etsa hore boto ena e be e tsitsitseng haholoanyane libakeng tseo ho tsona mongobo le mocheso li ka fetohang.
SPC flooring e fumaneha ka mefuta e mengata ea mebala le lipaterone.Tse ling tsa mekhoa ea fatše ea SPC e etselitsoe ho shebahala joaloka lehong le thata, lithaele kapa mefuta e meng ea fatše.Ponahalo ea 'nete ea lehong e ka thetsa mang kapa mang hore a nahane hore SPC ea rona e thata ea vinyl floating ea mabele ke thepa ea' nete.
Lipono le libopeho tsa hyper-realistic, li-bevel tse ntlafalitsoeng le mefuta e metle ea mebala e fana ka chebahalo le maikutlo a 'nete a ntho ea' nete, ntle le mathata a tlisoang ke ntho ea 'nete.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ha ho boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.2 limilimithara.(8 Mil.) |
| Bophara | 9" (230mm.) |
| Bolelele | 73.2" (1860mm.) |
| Qetella | Ho roala ha UV |
| Tobetsa |  |
| Kopo | Khoebo & Bolulo |
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
