Honey Brown SPC Hard Core Flooring
Tlhaloso:
Ntho:JSD55
Botenya:4.0mm ~ 8.0mm
Apara Layer:0.2mm ~ 0.7mm
Katlase (Taba ea boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Customization
The TopJoy Honey Brown SPC Hard Core vinyl flooring e nang le motheo o thata, o tiileng, o thata, o u lumellang ho kenya vinyl ea hau libakeng tseo u neng u ke ke ua li khona ka tloaelo.
Theknoloji e ncha ea lepolanka e thata ea TopJoy e thusa ho felisa maqhubu le maqhubu ao hangata a bakoang ke li-subfloor tse sa lekaneng.U fumana ts'ebetso e thata, e phethahetseng le mekato e sa keneleng metsi ka theko e tlase, e fang ntlo ea hau ponahalo e ntle.
Moralo ona oa mahe a linotsi a JSD55 ke o mong oa meralo ea khale ka ho fetesisa e loketseng maemo a bolulo le a khoebo.E etsisa lehong la tlhaho ka mokhoa o hlakileng ka theko e tlase ha e ntse e e-na le thepa e sa keneleng metsi le botsitso ba sebopeho ho feta ho beoa ha lehong.
SPC flooring ke sebaka se tšoarellang sa vinyl se tšoarellang ka ho fetesisa 'marakeng.
E entsoe ka phofo ea limestone le polyvinyl chloride, fatše e thata haholo ebile e thata hoo e ka mamellang libaka tsa khoebo tse nang le sephethephethe se phahameng ka ho fetisisa, ha ka lehlakoreng le leng vinyl ea setso e tsebahala ka ho tenyetseha le ho se tšoarelle nako e telele.Hape ke khetho e phethahetseng bakeng sa malapa a phathahaneng ka lebaka la ho tšoarella ha eona, ka hona, ho hanyetsa ho hoholo le ho hanyetsa matheba.U ka sebelisa mopo o mongobo ho hloekisa fatše.Fiela kapa u hloekise fatše ho tlosa litšila leha e le life kapa lehlohlojane ebe u sebelisa mopi o mongobo hammoho le se hloekisang fatše.
Motsoako oa polymer oa majoe o etsa hore lera leo la mantlha le se ke la senyeha, le pata ho se phethahale ha subfloor.Ka hona e ka boela ea kenngoa holim'a hoo e batlang e le mekato efe kapa efe e thata e teng.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 5.5 limilimithara |
| Katlase (Ha ho boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.3 limilimithara.(12 Mil.) |
| Bophara | 7.25" (184mm.) |
| Bolelele | 36" (914mm.) |
| Qetella | Ho roala ha UV |
| Tobetsa |  |
| Kopo | Khoebo & Bolulo |
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
