Khoebo Sebelisa Beige Vinyl Flooring Plank
Tlhaloso:
Ntho:JSC501
Botenya:4.0mm ~ 8.0mm
Apara Layer:0.2mm ~ 0.7mm
Katlase (Taba ea boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Customization
SPC vinyl flooring e entsoe ka thepa ea eco-friendly, e etsang hore e fetohe sebaka se le seng se tummeng lits'ebetsong tsa bolulo le tsa khoebo.Ha e na metsi le tlhokomelo e tlase, 'me e batla e tšoarella nako e telele.
Bakeng sa SPC ea rona ea fatše e nang le botenya ba 5mm e loketse likopo tsa khoebo le tsa sechaba, tse kang mabenkele a mabenkele, likolo, le lireschorente, joalo-joalo. Mmala oa Beige ke o mong oa mebala e rekisoang ka ho fetisisa har'a lelapa la vinyl flooring.Ka mor'a ho kenya lepolanka la fatše la Beige vinyl ka kamoreng ea hau, u tla fumana melemo e mengata ea eona.Ntlha ea pele, mokhoa oa 'mala ka kamoreng ea hau o fetoha o bobebe' me sebaka se shebahala se le seholoanyane.Taba ea bobeli, ha e na litšila ebile e bonolo ho uena ho hloekisa.Taba ea boraro, 'mala oa Beige ke oa tlhaho haholoanyane' me o etsisa lehong la pele, le ka kopanang le mefuta e mengata ea meralo ea kahare le ho tlisetsa batho maikutlo a mofuthu le khanya..Re khothaletsa seaparo se teteaneng, joalo ka botenya ba 0.5mm, hore se sebelisoe libakeng tsa khoebo, hobane se tla matlafatsa nako e telele ka boemo bo phahameng ba sephethephethe.The wear layer also can make sure that the friction ability, resistance performance, and stain resistance, etc. Kahoo, rona SPC flooring ka sebetsa hantle libakeng tsa khoebo.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 5mm |
| Katlase (Ha ho boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.5 limilimithara.(20 Mil.) |
| Bophara | 7.25" (184mm.) |
| Bolelele | 48" (1220mm.) |
| Qetella | Ho roala ha UV |
| Tobetsa |  |
| Kopo | Khoebo & Bolulo |
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
