Mabaka a macha a Hybrid
Tlhaloso:
Ntho:Setšoantšo sa CL1082L-8-EIR
Botenya:4.0mm ~ 8.0mm
Wear Layer:0.2mm ~ 0.7mm
Katlase (Ka boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Customization
TopJoy hybrid floor e na le karolo e ka hodimo e sa rokellehang, lera le kgabisang la kgatiso, le karolo e thata ya composite.Ka kakaretso li hlahisoa ka sebopeho sa mapolanka, li etsisa fatše lehong, 'me li etselitsoe ho kenngoa ka holim'a metsi.
Hybrid Flooring e na le motheo o sa keneleng metsi, kahoo ha e amehe ke mongobo, sena se bolela hore se loketse libaka tse nang le metsi a kang likhitla, liaparo tsa ho hlatsoetsa liaparo, likamore tsa ho hlapela, joalo-joalo.Ho fapana le mekato ea laminate kapa ea mapolanka, e ka ba metsi-mopped.Li-hybrids tsa rona li loketse ho kenngoa ka phaphametseng ka likarolo tse tšehetsang foam tse kentsoeng esale pele ho bolelang hore ha ho hlokahale hore ho be le setaele se arohaneng.Ka manonyeletso a ho notlela a nang le tokelo ea molao, a na le botsoalle ba DIY.Li-hybrids tsa rona li na le boits'oaro bo matla ka ho fetesisa, hobane li thata haholo ho feta LVT ea setso kapa lihlahisoa tse entsoeng ka lehong, ka hona li hanana le indentation, mohlala ho tsoa ho thepa ea ka tlung.
Motsoako oa ho tšoarella le tlhokomelo e bonolo e etsa hore Hybrid flooring e be khetho e nepahetseng bakeng sa malapa a nang le Bana le Liphoofolo.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ka boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.2 limilimithara.(8 Mil.) |
| Bophara | 7.25" (184mm.) |
| Bolelele | 48" (1220mm.) |
| Qetella | Ho roala ha UV |
| Locking System |
|
| Kopo | Khoebo & Bolulo |
Lintlha tsa Tekheniki:
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND - Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND - Feta |
| Finyella | No 1907/2006 REACH | ND - Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND - Feta |
| PCP | BS EN 14041:2018 | ND - Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND - Feta |
Lintlha tsa ho paka:
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
