Light Gray Stone Design SPC Luxury Vinyl
Tlhaloso:
Ntho:986-01s
Botenya:4.0mm ~ 8.0mm
Apara Layer:0.2mm ~ 0.7mm
Katlase (Taba ea boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:12" X 24"/ 12" X 12"/ Ho iketsetsa
Lithaele le lejoe ha li kenelle metsi, kahoo li qosoa e le tsona feela likhetho tsa rona bakeng sa fuluru e sa keneleng metsi lilemong tse mashome tse fetileng.Empa joale o na le khetho e eketsehileng, SPC luxury vinyl ke thepa e ncha ka ho fetisisa e sa keneleng metsi fatše.986-01s ke moralo oa majoe le theko e theko e tlaase.
SPC ke polasetiki ea majoe e kopantsoeng le floating e thata ea vinyl, kahoo ha e kenelle metsi.Joalo ka lejoe la 'nete, setulo sa SPC se tsitsitse ha se pepesehile mongobo.Kahoo joale u na le likhetho tse ngata tsa ho sebelisa lisebelisoa tse ling tsa fatše ka kamoreng ea hau ea ho hlapela, kichineng, kamoreng e ka tlaase le kamoreng ea ho hlatsoetsa.Ha ho bapisoa le lejoe la 'nete, fatše vinyl e thata e theko e tlaase ebile e bonolo ho e kenya.
Sebaka sa fatše sa SPC se tšoaroa ka ho roala ha UV, ha se etse feela hore se shebahale joaloka lejoe la tlhaho la 'mabole empa hape se etsa hore ho be bonolo ho hloekisa, batho ba ka sebelisa mopo ho hloekisa letsatsi le leng le le leng, ho boloka batho nako e ngata le matla, ke e 'ngoe. ea melemo.Matt, gloss e bohareng ke kalafo e tsebahalang ka ho fetesisa ea sefahleho sa 'mabole ea SPC.Re ka etsa li-embossing tse fapaneng ho latela lipaterone tse fapaneng.Ha e kenelle mollo hape, e ka thibela ho chesa ka sehlopha sa B1 sa ho thibela mollo.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ha ho boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.3 limilimithara.(12 Mil.) |
| Bophara | 12" (305mm.) |
| Bolelele | 24" (610mm.) |
| Qetella | Ho roala ha UV |
| Tobetsa |  |
| Kopo | Khoebo & Bolulo |
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
