Moetsi oa Phatlalatso ea Vinyl ea Rustic le e Boreleli
Tlhaloso:
Ntho:Tlhaloso: BSA 11
Botenya:4.0mm ~ 8.0mm
Apara Layer:0.2mm ~ 0.7mm
Katlase (Taba ea boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Customization
TopJoy rigid core flooring e etselitsoe ba batlang ho fokotsa nako ea ho hloekisa le litšenyehelo tsa tlhokomelo.Kaha setulo sena sa fatše ha se na metsi ka ho feletseng, beng ba matlo ha ba hloke ho tšoenyeha ka ho atolosoa le ho senyeha ka mor'a ho kenya fatše ka likamoreng tsa motheo kapa libaka tse metsi.Likamore tsa TopJoy SPC li ka kenngoa ka likamoreng tsa ho hlapela.
Na u batla chebahalo ea rustic kapa mokato o boreleli oa lehong?Mabato ana a matle a tla ka chebahalo ea setaele hape e theko e phahameng.'Me ho kenngoa ho boetse ho theko e boima, e leng ho eketsang litšenyehelo tsohle.Ntle le moo, o tlameha ho ba hlokolosi hore mekato ena e ke ke ea kenngoa ka likamoreng tse metsi joalo ka kamore ea ho hlapela, mokatong o ka tlase e le ho utloahala ha mongobo.
Ho thoe'ng haeba u ne u ka ba le boemo bo phahameng ba fatše bo shebahalang, esita le likamoreng tsa hau tse metsi, ka halofo ea litšenyehelo?Thepa ea motheo e thata ke tharollo ea hau!
SPC rigid core flooring ke sebaka se rekisoang ka ho fetisisa 'marakeng, haholo-holo bakeng sa malapa a phathahaneng a nang le bana le liphoofolo tse ruuoang lapeng.Ho fapana le mapolanka a fatše, a neng a ratoa malapeng a tsitsitseng, ha a kenelle metsi ka 100% 'me a ka sebelisoa ka tlung eohle.Ponahalo ea majoe le 'mabole e etselitsoe ho nka sebaka sa lithaelese tsa ceramic tse batang ka leqhoa.Mokotla o thata o fana ka ho tšoarella ka ho fetelletseng, ho haneloa le ho haneloa ke matheba, ho etsa hore ho be le ho boloka le ho hloekisa moea.U ka sebelisa mopo o mongobo habonolo ho hloekisa fatše.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ha ho boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.3 limilimithara.(12 Mil.) |
| Bophara | 7.25" (184mm.) |
| Bolelele | 48" (1220mm.) |
| Qetella | Ho roala ha UV |
| Tobetsa |  |
| Kopo | Khoebo & Bolulo |
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
