SPC Tobetsa Lock Sekeneng sa Metsi ka tlas'a Sephutheloana se Kenyellelitsoeng Lepolanka le Thibelang Matheba
Tlhaloso:
Ntho:AT1160L-9
Botenya:4.0mm ~ 8.0mm
Wear Layer:0.2mm ~ 0.7mm
Katlase (Ka boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Customization
TopJoy SPC Vinyl Flooring ke mokhoa o mocha ka ho fetisisa oa thekenoloji ea fatše, lejoe-polymer composite flooring, hase feela 100% e sa keneleng metsi le ho hanyetsa mollo, empa e boetse e fana ka botsitso bo boholo, ho tšoarella le ho hanyetsa tšusumetso ho fihlela makhetlo a 20 a theknoloji ea hona joale ea fatše ea laminate.
Lintlha tsa Sehlahisoa:
SPC ea fatše e tsoang TopJoy e fana ka nako e telele e ke keng ea lekanngoa le ho kenya ho bonolo haholo.Hape ke mofuta o le mong feela oa fatše o shebahalang ka lehong o fanang ka khetho ea ho thibela metsi esita le thepa ea 100% e sa keneleng metsi.Haeba u le ka mor'a ponahalo e kholisang ea mapolanka le ho ikutloa ka likamoreng tsa ho hlapela, likamore tsa ho hlatsoetsa liaparo, kapa likamore tse ka tlaase tsa vinyl ke bethe ea hau e ntle ka ho fetisisa mabapi le ts'ebetso ea nako e telele.Ha ho pelaelo hore mofuta o tummeng ka ho fetisisa oa thepa ea fatše 'marakeng oa kajeno, vinyl flooring e tsoang TopJoy e fana ka likhetho tse ncha ka ho fetisisa ka theko e ntle ka ho fetisisa.
SPC floor e bonolo haholo hore e ka hlokomeloa.E ka hlakoloa ka mopopo haeba mobu o le litšila.TopJoy SPC flooring e amohela seaparo se ikhethang sa UV habeli, e le hore sehlahisoa se na le tshebetso e ntle e kgahlanong le ditshila.
Le ha ngoana a ka etsa li-doodle fatše, kapa ha spice shaker e ka kichineng e ratoa, e ka hloekisoa habonolo.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ka boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.2 limilimithara.(8 Mil.) |
| Bophara | 7.25" (184mm.) |
| Bolelele | 48" (1220mm.) |
| Qetella | Ho roala ha UV |
| Locking System |
|
| Kopo | Khoebo & Bolulo |
Lintlha tsa Tekheniki:
 SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND - Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND - Feta |
| Finyella | No 1907/2006 REACH | ND - Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND - Feta |
| PCP | BS EN 14041:2018 | ND - Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND - Feta |
Lintlha tsa ho paka:
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
