SPC Rigid Vinyl Tile e nang le sebopeho sa majoe
Tlhaloso:
Ntho:TYM205
Botenya:4.0mm ~ 8.0mm
Wear Layer:0.2mm ~ 0.7mm
Katlase (Ka boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:12" X 24"/ 12" X 12"/ Ho iketsetsa
TopJoy e entsoe ka mokhoa o sa sebetseng, Tile ea rona ea pele ea SPC e Rigid Vinyl e entsoeng ka majoe e tlisa botle ba tlhaho ba travertine, letlapa, 'mabole le majoe a mokoetla bophelong ba hau.E kopanya matla a lejoe empa e na le maikutlo a rarahaneng le a mofuthu a tlas'a maoto, e leng se etsang hore e be tharollo e phethahetseng ea fatše bakeng sa libaka tsa bolulo le tsa khoebo.
Lintlha tsa Sehlahisoa:
Mohlomong u khetha mokhoa o ikhethileng le mekhoa e rarahaneng ea majoe a betliloeng kapa mokhoa o boreleli oa 'mabole oa khale.Leha ho le joalo, ha u rate maikutlo a batang, a ke keng a qojoa a fanoang ke lejoe la tlhaho kapa 'mabole.TopJoy SPC Rigid Vinyl Tile e khona ho sebetsana hantle le ho u khotsofatsa ka litlhoko tsohle tsa hau.Boemo ba leholimo lehlabuleng le bataolang kapa mariha a batang, kamehla e fana ka maikutlo a boiketlo a tlas'a maoto.
E boetse e na le phetoho ea phetoho (E hlahisitsoe tlas'a laesense e tsoang ho Unilin innovation) tsamaiso ea ho kenya fatše e lumellang hore ho be bonolo ho kenya ka holim'a konkreite, lithaele le tse ling ntle le mosebetsi, litšila kapa theko e boima ea lejoe la tlhaho kapa lithaele tsa 'mabole.
TopJoy SPC Rigid Vinyl Tile e nang le sebopeho sa majoe ke khetho e phethahetseng bakeng sa libaka tsa bolulo le tsa khoebo.E entsoe ka theknoloji e sa keneleng metsi ea Rigid Core, litšoaneleho tsa antibacterial le acoustic, pokello ena e ncha ea lithaele tsa majoe a SPC e tla hlalosa bocha fatše bakeng sa libaka tsa ho sebetsa le tsa bolulo.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ka boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.2 limilimithara.(8 Mil.) |
| Bophara | 12" (305mm.) |
| Bolelele | 24" (610mm.) |
| Qetella | Ho roala ha UV |
| Locking System |
|
| Kopo | Khoebo & Bolulo |
Lintlha tsa Tekheniki:
 SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
Lintlha tsa ho paka:
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
