Metsi a sa keneleng Metsi a Rigid Core Vinyl Click Flooring
Tlhaloso:
Ntho:TJ11301-KB1
Botenya:4.0mm ~ 8.0mm
Wear Layer:0.2mm ~ 0.7mm
Katlase (Ka boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Customization
Re kopantsoe le mekhoa ea mapolanka e tsotehang le ea sebele, re theha chebahalo e tsotehang e loketseng kamore efe kapa efe.Rigid Core Vinyl Flooring e hahiloe ho boloka botle ba eona - esita le tlas'a sephethephethe se phahameng, mongobo o phahameng le tšusumetso e phahameng.
Bakeng sa paterone ena lehong SPC Flooring, TJ11301-KB1, botenya e ka ba 4.0/5.0/6.0 limilimithara kapa customized.Le hoja e se tšesaane haholo, e thata haholo ha e bapisoa le botenya bo tšoanang ba mefuta e meng ea fatše, kahoo e ikutloa e tsitsitse ebile e tsitsitse ha u tsamaea ho eona.
Ka 100% e sa keneleng metsi, e teteaneng ka mokhoa o makatsang, fatše SPC e ka mamella litlhoko tsa kemiso ea hau ea letsatsi le letsatsi.E kenye ka phaposing efe kapa efe, esita le kichineng, likamoreng tsa ho hlapela, liphaposing tsa seretse le likamoreng tse ka tlase.Ha re pepesetsoa metsi mapolanka a rona a ke ke a ruruha, a tlamella kapa a lahleheloa ke botšepehi.
Tlhokomelo ha se bothata ho hang, lesela le tšoarellang le kalafo ea UV ka holimo li etsa hore ho be bonolo haholo ho li boloka li hloekile.Ho hloekisa khafetsa kapa ho fiela le ho kokota ka linako tse itseng ho tla loka.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ka boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.2 limilimithara.(8 Mil.) |
| Bophara | 7.25" (184mm.) |
| Bolelele | 48" (1220mm.) |
| Qetella | Ho roala ha UV |
| Locking System |
|
| Kopo | Khoebo & Bolulo |
Lintlha tsa Tekheniki:
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND - Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND - Feta |
| Finyella | No 1907/2006 REACH | ND - Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND - Feta |
| PCP | BS EN 14041:2018 | ND - Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND - Feta |
Lintlha tsa ho paka:
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
