Paterone ea lehong SPC Rigid Core Vinyl flooring bakeng sa lapeng
Tlhaloso:
Ntho:TJ1082-KBL
Botenya:4.0mm ~ 8.0mm
Wear Layer:0.2mm ~ 0.7mm
Katlase (Ka boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Customization
Ka ho khetha SPC rigid core vinyl flooring, o ka natefeloa ke botle ba lisebelisoa tse joalo ka letlapa, tse hapiloeng ka boqhetseke ka har'a letlapa la vinyl.Kamore efe kapa efe ea ntlo ea hau e lokile, esita le tlas'a sephethephethe se phahameng, mongobo o phahameng le tšusumetso e phahameng.
SPC rigid core vinyl floors e na le melemo e mengata e etsang hore e be letsete le tiileng, 'me e sebetsa ka ho khetheha bakeng sa malapa a nang le liphoofolo tse ruuoang lapeng le bana.Ho kenyeletsoa habonolo le theko e batlang e le theko e tlaase le eona e tla thusa ho fokotsa litšenyehelo.Ka mekhoa e batlang e se na moeli ea moralo, ke hape ho bonolo ho fumana chebahalo e lumellanang le setaele sa hau.
Paterone ea lehong ea TJ1082-KBL SPC e tiileng ea vinyl floating ea vinyl, li-bevel tse ntlafalitsoeng le mefuta e metle ea mebala e fana ka chebahalo le maikutlo a 'nete a ntho ea nnete, ntle le bothata boo ntho ea nnete e e tlisang.Mefuta e mengata ea likhetho e molemo ho ba batlang ho khona ho fetola ponahalo ea lehae la bona.E ka kenngoa libakeng tsa lehae tse kang likamore tsa ho hlatsoetsa liaparo, liphaposi tsa ho hlapela, likamore tse ka tlase, le kichine.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ka boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.2 limilimithara.(8 Mil.) |
| Bophara | 7.25" (184mm.) |
| Bolelele | 48" (1220mm.) |
| Qetella | Ho roala ha UV |
| Locking System |
|
| Kopo | Khoebo & Bolulo |
Lintlha tsa Tekheniki:
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND - Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND - Feta |
| Finyella | No 1907/2006 REACH | ND - Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND - Feta |
| PCP | BS EN 14041:2018 | ND - Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND - Feta |
Lintlha tsa ho paka:
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
