5.0 mm Ukuchofoza Okungangeni Manzi Khiya I-Wood Grain SPC Rigid Core
Incazelo:
Into:JSD37
Ubukhulu:4.0mm ~ 8.0mm
Gqoka Isendlalelo:0.2mm ~ 0.7mm
I-Underlay(Ongakukhetha):EVA/IXPE, 1.0mm~2.0mm
Usayizi:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Ukwenza ngokwezifiso
I-100% Ingangeni manzi ngesendlalelo sokugqoka esingu-0.5 mm esivumela ukuklwejwa okuphakeme nokumelana nokugqoka.I-SPC rigid core inikeza ukuzinza nokuqina, ingafakwa phezu kwanoma iyiphi i-subfloor ehlanzekile, eneleveli neyomile.
Uma ipulangwe olikhethayo lijiyile, lizozizwa likhululekile ngaphansi kwezinyawo.5.0 mm noma ugqinsi nakakhulu kuyoba kuhle uma ukhetha i-SPC vinyl flooring yendlu.
Uma kuqhathaniswa ne-flooring yendabuko efana ne-LVT, i-WPC, i-hardwood flooring, inzuzo ye-SPC Rigid Core Flooring ukuqina okungenakuqhathaniswa, ukufinyeleleka, ukuphepha, ukufakwa kalula kanye no-100% ongenamanzi.
Izakhi eziwumgogodla eziqinile zakhiwe ngendlela ehlukile ukuze zimelane nakho konke, ukuze ukwazi ukuzifaka kunoma yiliphi igumbi lendlu yakho, ngisho negumbi lokugezela, amakhishi.Ungakhathazeki ngokulungiswa, ukuminyene ngendlela emangalisayo kuyenza imelane nemithelela, amabala, imihuzuko, nokuguga, ukucofa okujwayelekile kuphela noma ukushanela kanye nokumopha ngezikhathi ezithile kuzolunga.
| Ukucaciswa | |
| Ukwakheka Kobuso | Ukwakheka Kwezinkuni |
| Ubukhulu Sebonke | 6.5mm |
| I-underlay(Uma uthanda) | I-IXPE/EVA(1mm/1.5mm) |
| Gqoka Isendlalelo | 0.5mm.(20 Mil.) |
| Ububanzi | 7.25" (184mm.) |
| Ubude | 48" (1220mm.) |
| Qeda | I-UV Coating |
| Chofoza |  |
| Isicelo | Ezohwebo Nezindawo Zokuhlala |
| IDATHA YOBUCHWEPHESHE YE-SPC RIGID-CORE PLANK | ||
| Ulwazi Lobuchwepheshe | Indlela Yokuhlola | Imiphumela |
| I-Dimensional | I-EN427 & | Dlula |
| Ubukhulu ngokuphelele | I-EN428 & | Dlula |
| Ubukhulu bezendlalelo zokugqoka | I-EN429 & | Dlula |
| Ukuzinza kweDimensional | I-IOS 23999:2018 ne-ASTM F2199-18 | Izikhombisi-ndlela Zokukhiqiza ≤0.02% (82oC @ 6hrs) |
| Kuzo zonke izikhombisi-ndlela zokukhiqiza ≤0.03% (82oC @ 6hrs) | ||
| Ukugoqa (mm) | I-IOS 23999:2018 ne-ASTM F2199-18 | Ivelu 0.16mm(82oC @ 6hrs) |
| Amandla Ekhasi (N/25mm) | I-ASTM D903-98(2017) | I-Manufacturing Direction 62 (Isilinganiso) |
| I-Direct Manufacture Direction 63 (Isilinganiso) | ||
| I-Static Load | I-ASTM F970-17 | Ukuhlehliswa Okusele:0.01mm |
| Ukuhlehliswa Kwezinsalela | I-ASTM F1914-17 | Dlula |
| I-Scratch Resistance | ISO 1518-1:2011 | Akukho kungene i-coating ekulayisheni okungu-20N |
| Amandla Okukhiya(kN/m) | ISO 24334:2014 | Isikhombisi-ndlela Sokukhiqiza 4.9 kN/m |
| Kuzo zonke izikhombisi-ndlela Zokukhiqiza 3.1 kN/m | ||
| Ukushesha Kombala Ekukhanyeni | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005&ASTM D2244-16 | ≥ 6 |
| Ukusabela emlilweni | I-BS EN14041:2018 Isigaba somthetho 4.1 & EN 13501-1:2018 | I-Bfl-S1 |
| I-ASTM E648-17a | Ikilasi 1 | |
| I-ASTM E 84-18b | Ikilasi A | |
| Ukukhishwa kwe-VOC | I-BS EN 14041:2018 | ND - Dlula |
| I-ROHS/Insimbi Enzima | EN 71-3:2013+A3:2018 | ND - Dlula |
| Finyelela | No 1907/2006 REACH | ND - Dlula |
| Ukukhishwa kwe-formaldehyde | I-BS EN14041:2018 | Ikilasi: E1 |
| Ukuhlolwa kwe-Phthalate | I-BS EN 14041:2018 | ND - Dlula |
| I-PCP | I-BS EN 14041:2018 | ND - Dlula |
| Ukufuduka Kwezinto Ezithize | EN 71 – 3:2013 | ND - Dlula |
| Ulwazi Lokupakisha(4.0mm) | |
| Ama-PC/ctn | 12 |
| Isisindo(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Isisindo(KG)/GW | 24500 |
