I-Luxury Vinyl Plank Flooring Chofoza nge-Foam Back SPC Rigid Core
Incazelo:
Into:JSD38
Ubukhulu:4.0mm ~ 8.0mm
Gqoka Isendlalelo:0.2mm ~ 0.7mm
I-Underlay(Ongakukhetha):EVA/IXPE, 1.0mm~2.0mm
Usayizi:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Ukwenza ngokwezifiso
Ukufakwa ngaphansi okunamathiselwe ngaphambilini kunciphisa umsindo, kubamba ukushaqeka, futhi kuthuthukisa imfudumalo nokunethezeka ngaphansi kwezinyawo, ngomongo oqinile, ungqimba oluqinile lokugqokwa kwenza i-vinyl locking flooring ihlale iminyaka.
Izinketho eziningi ze-vinyl eziqinile ze-SPC ezingenamanzi zifaka ungqimba olusekelayo noma okunamathiselwe ngaphansi kwegwebu.Lokhu kufeza izinhloso ezimbili:
Okokuqala, ngeke kudingeke ukuthi uthenge okungaphansi okwengeziwe, futhi okwesibili, kunikeza izinyawo ezingaphansi eziminyene futhi eziqinile futhi ukumuncwa komsindo phansi kwakho.
Lokhu uzokwazi kangcono uma uke wahamba phansi ngaphandle kokufakwa ngaphansi, kunomsindo ongenalutho uma unyathelwa futhi ukusekelwa okunamathiselwe kuvimbela lokhu.
Sekuvele kunegwebu elingu-1.5 mm le-IXPE elisekela phansi phansi.Njengebhonasi, asikho isidingo sokuthi usebenzise imali eyengeziwe ekuthengeni okungaphansi futhi ukufake ngaphambi kokufaka i-vinyl yakho entsha, okwenza ukufakwa kusheshe futhi kube lula.
Ukufakwa kuyafana ne-flooring ngaphandle kokusekelwa kwegwebu, ukuchofoza nje endaweni kuzoba KULUNGILE.
| Ukucaciswa | |
| Ukwakheka Kobuso | Ukwakheka Kwezinkuni |
| Ubukhulu Sebonke | 6.5mm |
| I-underlay(Uma uthanda) | I-IXPE/EVA(1mm/1.5mm) |
| Gqoka Isendlalelo | 0.5mm.(20 Mil.) |
| Ububanzi | 7.25" (184mm.) |
| Ubude | 48" (1220mm.) |
| Qeda | I-UV Coating |
| Chofoza |  |
| Isicelo | Ezohwebo Nezindawo Zokuhlala |
| IDATHA YOBUCHWEPHESHE YE-SPC RIGID-CORE PLANK | ||
| Ulwazi Lobuchwepheshe | Indlela Yokuhlola | Imiphumela |
| I-Dimensional | I-EN427 & | Dlula |
| Ubukhulu ngokuphelele | I-EN428 & | Dlula |
| Ubukhulu bezendlalelo zokugqoka | I-EN429 & | Dlula |
| Ukuzinza kweDimensional | I-IOS 23999:2018 ne-ASTM F2199-18 | Izikhombisi-ndlela Zokukhiqiza ≤0.02% (82oC @ 6hrs) |
| Kuzo zonke izikhombisi-ndlela zokukhiqiza ≤0.03% (82oC @ 6hrs) | ||
| Ukugoqa (mm) | I-IOS 23999:2018 ne-ASTM F2199-18 | Ivelu 0.16mm(82oC @ 6hrs) |
| Amandla Ekhasi (N/25mm) | I-ASTM D903-98(2017) | I-Manufacturing Direction 62 (Isilinganiso) |
| I-Direct Manufacture Direction 63 (Isilinganiso) | ||
| I-Static Load | I-ASTM F970-17 | Ukuhlehliswa Okusele:0.01mm |
| Ukuhlehliswa Kwezinsalela | I-ASTM F1914-17 | Dlula |
| I-Scratch Resistance | ISO 1518-1:2011 | Akukho kungene i-coating ekulayisheni okungu-20N |
| Amandla Okukhiya(kN/m) | ISO 24334:2014 | Isikhombisi-ndlela Sokukhiqiza 4.9 kN/m |
| Kuzo zonke izikhombisi-ndlela Zokukhiqiza 3.1 kN/m | ||
| Ukushesha Kombala Ekukhanyeni | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005&ASTM D2244-16 | ≥ 6 |
| Ukusabela emlilweni | I-BS EN14041:2018 Isigaba somthetho 4.1 & EN 13501-1:2018 | I-Bfl-S1 |
| I-ASTM E648-17a | Ikilasi 1 | |
| I-ASTM E 84-18b | Ikilasi A | |
| Ukukhishwa kwe-VOC | I-BS EN 14041:2018 | ND - Dlula |
| I-ROHS/Insimbi Enzima | EN 71-3:2013+A3:2018 | ND - Dlula |
| Finyelela | No 1907/2006 REACH | ND - Dlula |
| Ukukhishwa kwe-formaldehyde | I-BS EN14041:2018 | Ikilasi: E1 |
| Ukuhlolwa kwe-Phthalate | I-BS EN 14041:2018 | ND - Dlula |
| I-PCP | I-BS EN 14041:2018 | ND - Dlula |
| Ukufuduka Kwezinto Ezithize | EN 71 – 3:2013 | ND - Dlula |
| Ulwazi Lokupakisha(4.0mm) | |
| Ama-PC/ctn | 12 |
| Isisindo(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Isisindo(KG)/GW | 24500 |
