Patsi e sa keneleng metsi e shebahalang e le Ragid Core Flooring
Tlhaloso:
Ntho:JSA05
Botenya:4.0mm ~ 8.0mm
Apara Layer:0.2mm ~ 0.7mm
Katlase (Taba ea boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Customization
Mokato o tiileng oa mantlha o boetse o rehiloe SPC flooring e tsebahalang haholo ka ho se kenelle metsi ka 100%.Motheo o thata oa fatše ha o kenelle metsi feela, empa o boetse o shebahala ka tsela e fapaneng le ea 'nete.Kahoo e ka sebelisoa hohle lapeng empa haholo-holo ka kichineng, likamoreng tsa ho hlapela le mokatong o ka tlase.Ua tseba, libaka tseo tse kotsi tse nang le metsi.
Mokato o thata oa fatše ha o kenelle metsi.SPC fatše e ne e etselitsoe lits'ebetso tsa khoebo, ka lebaka la ho tšoarella ha eona ka kakaretso le ho mamella sephethephethe se phahameng.'Me lebaka le leng la bohlokoa haholo ke hore, litšenyehelo tsa ho hlahisa SPC fatše li tlase ho feta WPC.Kajeno, fuluru e thata ea mantlha e ntse e hola ka lehlakoreng la bolulo.
Ntle le ho ameha ka litšenyehelo, ponahalo ea eona e bohale e ka etsa feshene ea morao-rao le ea setaele liofising le libakeng tse ling tsa khoebo.E ntse e tuma haholo mme e ananeloa ke beng ba likhoebo.Re sa bue, hore e boetse e ratoa ke beng ba liphoofolo tse ruuoang lapeng, hobane mokokotlo o thata o matla hoo o thibelang liphoofolo tse ruuoang lapeng hore li se ke tsa ingoaea.Hape ha e thellehe haholo bakeng sa lipeo tsa malinyane ho feta likhetho tse ling tsa laminate.Bakeng sa li-DIYers, u ke ke ua hloka ho hahola subfloor ea hau e teng, empa u kenelle feela 'me u phaphametse fatše holim'a vinyl ea hau e thata holim'a sebaka sa hau se teng.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ha ho boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.3 limilimithara.(12 Mil.) |
| Bophara | 7.25" (184mm.) |
| Bolelele | 48" (1220mm.) |
| Qetella | Ho roala ha UV |
| Tobetsa |  |
| Kopo | Khoebo & Bolulo |
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
